Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Danfoss Devidry
Summary of Contents for Danfoss Devidry
- Page 1 Click & Plug Floor Heating Installation instruction Devidry™...
- Page 2 Devidry™ Congratulations with your new DEVI floor heating system. DEVI is Europe’s leading floor heating manufacturer with more than 45 years of experience. We are confident that you will be satis- fied with your new system. DEVI brings you optimum comfort with the luxury and comfort of a warm floor as well as a pleasant room temperature.
-
Page 3: General Information
Concrete floor constructions: in dry rooms only and must always be 55 W/m or 100 W/m installed with the Devidry™ Kit. If the system is installed under carpets we recommend to full tape the elements together with duct tape (not supplied in the kit). -
Page 4: Product Overview
Product overview The Devidry™ Kit consists of the Other products in the Devidry™ product Devidry™ C (controller), the Devidry™ CD range are: (current device), the Devidry™ Connec- tion Tool and aluminium tape to fasten the floor sensor to the floor with. - Page 5 Devidry™ X Devidry™ Tape Devidry™ Protection Cap 08090471 - 01...
- Page 6 Devidry™ Element Devidry™ Kit 100 Devidry™ Kit Accessories Devidry™ Name Description Devidry™ X-25 Devidry™ Extension Cord, 25 cm Devidry™ X-100 Devidry™ Extension Cord, 100 cm Devidry™ X-200 Devidry™ Extension Cord, 200 cm Devidry™ FM-1 Devidry™ Filler Material, 1 m Devidry™ FM-2 Devidry™...
-
Page 7: Technical Details
Output 55 W/m or 100 W/m Sound reduction value 17 dB Insulation value μ 8W/m Maximum heated surface per Devidry Kit (Max. current limit is 10 Amps) Product Max. heated surface Devidry™ 55 42 m Devidry™ 100 23 m 08090471 - 01... - Page 8 For Devidry™ 55 Floor area Heated surface Total power output Amp 0,4 m 22 watt 0,10 Amp 1,4 m 77 watt 0,33 Amp 2,4 m 132 watt 0,57 Amp 3,4 m 187 watt 0,81 Amp 4,4 m 242 watt 1,05 Amp For Devidry™...
- Page 9 (never on wooden floor consr imbedded in concrete) truc- tion, never imbedded in concrete) The Devidry™ element may be cut here to fit the actual area, as there are no electrical parts in this area The Devidry™ element cannot be cut here as there are electrical parts in...
-
Page 10: Preparing The Base
Use the filler material to fill this space afterwards. Sample calculations are provided below to help you work out how many Devidry™ floor heating elements are required. All Devidry™ floor heating elements are one metre wide and the standard length var- ies from one to five metres. - Page 11 2) When the area is 3,75m wide and 7,10 4) Installing extension cords Devidry™ m long, you will need 6 x 4m Devidry™ X: The extension cords must only be floor heating elements. Cut the 4m placed in the filler material and not long elements down to 3.75m.
- Page 12 (ventilation) under the furniture. When designing the layout, make sure not to install Devidry™ heating element under permanent or built-in cupboards or fire places/ovens. Instead Devidry™ filler material should be used.
- Page 13 Example: Ampere (I) multiplied by Volt your appliances equals the remaining (U) equals Power (P): power that is available for your Devidry™ floor heating system. Calculate the avail- I x U = P able power for your Devidry™ floor heat-...
- Page 14 Devidry™ 55 42 m able fuse. The Devidry™ CD withstands max. 10 Devidry™ 100 23 m A at 230 V ~ (equivalent to 2300 watt). In the following tables you will find maximum heated surface per Devidry™...
- Page 15 For Devidry™ 55 (Mains voltage 230 Volt and 50 Hz) Floor area Heated surface Total power output Amp 0,5 m 22 watt 0,10 Amp 1,5 m 77 watt 0,33 Amp 2,5 m 132 watt 0,57 Amp 3,5 m 187 watt...
- Page 16 4. Connecting the Devidry™ elements Unroll and align the Devidry™ elements permanently. Continue with the subse- where you intend to place them with the quent elements in the same manner. printed side upwards. All elements have an end stop to protect the connection Make sure that all plug-in connections against pressure.
- Page 17 5. Cutting the Devidry™ floor heating element to size To cut the element to size: Carefully measure the piece you wish to cut off and simply cut with your knife. Each end of the Devidry™ heating ele- ment consists of 25 cm without electri- cal parts inside.
- Page 18 (If you plan to install the Devidry™ under carpets we recommend taping the ele- ments together with Devidry™ Tape as shown on the picture).
- Page 19 7. Mounting the Devidry™ Kit Mount the Devidry™ Kit to the wall. The Devidry™ Kit should be installed in Devidry™ C accordance with the instruction manual supplied with the kit. Cut a piece of material from the filler material to make room for the plug-in connection between the Devidry™...
- Page 20 8. Checking the Devidry™ floor heating system Check that all work has been carried out If the floor heating elements are not in accordance with directions before warming up to the same temperature testing the Devidry™ floor heating the plug-in connections should be system.
-
Page 21: Warning Label
10. Warning label The warning label that is included in the Devidry™ Kit must be filled out and installed in the distribution board. For future reference it is important to fill in, which room and how many Devidry™... - Page 22 Layout paper Please draw the room on the page below and position the heating mats that you are installing (for future reference) These products are installed in Room 08090471 - 01...
-
Page 23: Safety Precautions
• T he Devidry™ floor heating system • T he controller Devidry™ C100 must is only to be used with the Devidry™ only be used with installations on con- extension cords (The Devidry™ X). Do crete floors and Devidry™ C55 can be never cut the extension cords or the used with both floor constructions. - Page 24 THIS SIDE • S ave the manual together with the warranty papers for further use – or if you want to take the Devidry floor heating system with you at a later state. 08090471 - 01...
- Page 25 08090471 - 01...
- Page 26 The DEVI Warranty shall not cover any program. damage caused by incorrect condi- tions of use, incorrect installation or This 5 year warranty applies to Devidry™ if installation has been carried out by heating elements and DEVI Self-limiting non-authorised electricians. All work will...
-
Page 27: Warranty Certificate
5 YEAR WARRANTY Warranty Certificate The DEVI Warranty certificate is granted to Name Address City Country Telephone Attention: The Warranty Certificate must be completed correctly for the Warranty to be valid. Please read the Warranty conditions on the previous page. Type of product Material number Supplier Stamp... - Page 28 08090471 Version - 01 DEVI A/S Ulvehavevej 61 DK-7100 Vejle Tel: +45 7642 4700 Fax: +45 7642 4701 www.devi.com...