Vx Solo Ii H2 (Ecl 210/A260.1D) -2 He Circuits - Danfoss VX Solo II Instructions Manual

Instructions

6.3 VX Solo II H2 (ECL 210/A260.1d) -2 HE circuits

1 Plate heat exchanger
8 Circulation pump, HE
10 Circulation pump, FH
16 Expansion vessel
24 Fitting piece for heat meter
25 Electronic controller
29 Actuator AMV 13)
30 Flow controller with integrated control valve AHQM
33 Actuator AMV150
34 3-way valve VMV 30/15
57 Safety temperature monitor
The substations offer variable connection possibilities, as
connection of pipes can be established both in the top or in
the bottom of the substation.
Please note:
Your substation may look different than the substation shown, as
variants with other components may be supplied. The control func-
tion, however, is basically as stated in this instruction manual.
Instructions for the fitted components will be supplied together with
the substation.
Measurements:
Dimensions without cover
H860 x W530 x D365 mm
Dimensions with cover
H860 x W550 x D380 mm
Connections:
Order:
1 District heating (DH) supply
2 District heating (DH) return
3 Heating (HE) return
4 Heating (HE) supply
5 Floor heating (FH) supply
6 Floor heating (FH) return
Connection sizes (example:
DH: G¾ (ET)
HE + FH: G¾ (IT)
14 DKDHR
VX Solo II
1
top view
VI.GP.P1.02
34
25
29
30
16
8
24
Primary Secundary
Wall
Danfoss District Energy
57
33
10