Danfoss VX Solo II Instructions Manual page 39

Instructions VX Solo II HWS (ECL 210/A247)
Domestic hot water
The VX Solo II HWS substations are supplied with connection pipes
for domestic hot water cylinder on the secondary side, and the tem-
perature in the cylinder is controlled by the Danfoss ECL controller.
Domestic hot water circulation pump
It is recommended to set the pump at highest speed of rotation (set-
ting 3) before start-up. Then set the pump at lowest possible speed of
rotation (setting 1), in due consideration of the electricity consump-
tion and the heating comfort. Factory setting of the selector switch is
centre position (default).
Select setting 2 and 3 only if the pump setting does not meet actual
system requirements.
Please see enclosed instructions,
GRUNDFOS UPS
Installation and operating instructions
Grundfos UP UPS
GRUNDFOS INSTRUCTIONS
UPD, UPSD
UP, UPS, UPD, UPSD
39 39
Danfoss District Energy VI.GP.P1.02 DKDHR