Advertisement
How to configure TRIUMPH-1M as a Base Station
with Repeater
1. To connect the Base to JMobile, use Bluetooth.
For this run the JMobile software, and tap "Connect".
Choose the receiver from list.
2. Open the RTK Base item from Main menu.
www.javad.com
3. Setup the Base position. Find the three types of posi-
tioning:
• Get From Receiver;
• Get From Catalog;
• Set Coordinates.
4. Scroll little down to configure the UHF radio. Tap on
the "Radio (Unknown)" and choose "My UHF Radio".
3
Advertisement
Need help?
Do you have a question about the TRIUMPH-1M and is the answer not in the manual?