Connections For Clip Audio Insert Editing - Sony PDW-1500 Operation Manual

Connections using the
Cut editing system comprising this unit as a player and a DSR-
2000/2000P unit as a recorder. For cut editing, the system uses
the editing functions of the recorder. In this system, all signals
such as the video/audio signals and control signals are
transferred through the
Video monitor
PDW-1500 (player)
PDW-1500 (player) settings
Remote control switch (see page 20): REMOTE
Extended menu item 214 "REMOTE INTERFACE": i.LINK

3-1-5 Connections for Clip Audio Insert Editing

By connecting this unit to a VTR (for example, MSW-
M2000/M2000P or DSR-2000/2000P), you can make up a
clip audio insert editing system. Some example
connections are shown in the following.
Notes
• An editing control unit such as the BVE-700 is required
because this unit has no functions for controlling other
devices.
• The MSW-M2000/M2000P shown in the figure supports
up to 8 channels of audio output. The number of
channels which may be input to this unit varies
depending on the type of input signal. Up to 8 channels
S400 (i.LINK) connector:
S400 (i.LINK) connector.
To analog audio input connector
To composite video
input connector
2
1
VIDEO OUT 2
(SUPER)
AUDIO MONITOR
OUT
S400 (i.LINK)
1: 75 Ω coaxial cable (not supplied)
2: Cable with RCA phono plugs (not supplied)
3: i.LINK cable (not supplied)
To composite video
input connector
1
3
i.LINK (optional DSBK-190)
VIDEO OUT 3(SUPER)
DSR-2000/2000P (recorder) settings
i.LINK button: Lit
SDTI/i.LINK button: i.LINK
For details about the settings of the DSR-2000/2000P, refer to the
operating instructions for the unit.
of SDI input, 4 channels of DIGITAL AUDIO (AES/
EBU) input, or 2 channels of ANALOG input are
supported. Check the input channels before making
connections.
See page 71 for more information about clip audio insert
editing.
When making the connections, also refer to the manuals
provided with the equipment to be connected.
See page 41 for more information about editing control
unit settings.
Video monitor
DSR-2000/2000P
(recorder)
37
3-1 Connections and Settings