Sony PDW-1500 Operation Manual page 98

Item number Item name
651 UMID SDI OUTPUT
652 UMID SDI VANC LINE
657 ESSENCE MARK SDI OUTPUT
660 ESSENCE MARK SDI VANC LINE
Item number Item name
701 SELECTION OF VIDEO/SYNC
DELAY
703 BLANK LINE SELECT
Sub-item
0
In 525(u)-line 12 ... 19
mode
20
In 525(J)-line 12 ... 20
mode
21
98
8-3 Extended Menu
Menu items in the 600s, relating to the time code, metadata, and UMID
Settings
Select whether to output UMID in the VANC of the SDI output.
off: Do not output.
on: Output.
See 8-3-3 "Using UMID Data" (page 104) for more information about
UMID.
Select the line in which UMID is output when menu item 651 is set to "on."
12H, 13H, 15H, 16H, 17H, 18H, 19H (525(U)/525(J)-line modes)
9H, 10H, 12H, 13H, 14H, 15H, 16H, 17H, 18H (625-line mode)
See 8-3-3 "Using UMID Data" (page 104) for more information about
UMID.
Select whether to output essence marks in the SDI output VANC.
off: Do not output.
on: Output.
When item 657 is set to "on", select the line to which to output essence
marks.
12H, 13H, 15H, 16H, 17H, 18H, 19H (525(U)/525(J)-line modes)
9H, 10H, 12H, 13H, 14H, 15H, 16H, 17H, 18H (625-line mode)
Menu items in the 700s, relating to video control
Settings
An E-E video signal is output delayed with respect to the video input signal
by the time for video circuit processing.
With this item, select whether or not to delay the sync signal attached to
the output video signal by an amount corresponding to the video signal
delay.
sync: Delay the sync signal by the corresponding amount before attaching
video: Attach a sync signal with the same timing as the input signal.
Switch blanking of the video output signal on or off for individual lines in the
vertical blanking interval.
The Y/C signal and odd/even fields are blanked simultaneously.
ALL LINE - - -: Specify the blanking for each line separately.
blnk: Regardless of the setting of other sub-items, blank all lines which
thru: Regardless of the setting of other sub-items, switch off blanking for
LINE 12 ... LINE 19 Specify blanking for lines 12 to 19.
blnk: Carry out blanking.
thru: Switch off blanking.
LINE 20 Specify blanking for line 20.
blnk: Carry out blanking.
half: Carry out half-blanking.
thru: Switch off blanking.
LINE 12 ... LINE 20 Specify blanking for lines 12 to 20.
blnk: Carry out blanking.
thru: Switch off blanking.
LINE 21 Specify blanking for line 21.
blnk: Carry out blanking.
half: Carry out half-blanking.
thru: Switch off blanking.
it.
can be specified in this menu item.
all lines which can be specified in this menu item.