Sony PDW-1500 Operation Manual page 65

Moving a sub clip
Proceed as follows.
1
Press the SUBCLIP button, turning it on.
2
Press the THUMBNAIL button, turning it on.
Thumbnails of the sub clips within the current clip list
appear.
To escape from the thumbnail display to the full-
screen display
Press the THUMBNAIL button, turning it off.
3
Use the arrow buttons or jog dial to select the desired
sub clip.
You can select sub clips with the following operations.
Press the PREV or NEXT button: Move to the
previous or next sub clip.
Press the PREV or NEXT button with the SHIFT
button held down: Move to the first or last sub
clip.
Press the F or f button with the SHIFT button held
down: Switch to the previous or next page.
4
Hold down the SHIFT button, and press the SET
button.
The sub clip operation menu appears.
To return to the thumbnail display without moving
the sub clip
Do either of the following.
• Use the arrow buttons to select EXIT, and press the
SET button.
• Press the RESET button.
5
Use the arrow buttons to select MOVE, and press the
SET button.
The sub clip movement screen appears. The sub clip
selected in step 3 appears surrounded by a frame.
This shows that third sub clip is moved
to the position of eighth sub clip.
Cursor showing the position to which
the selected sub clip is moved
To escape from the sub clip movement screen to the
previous screen
Press the RESET button.
6
Use the arrow buttons or the jog dial to move the
cursor to the position where you want to move the
selected sub clip.
Note
You can press the THUMBNAIL button to return to
full-screen sub clip display, without moving a sub clip.
7
Press the SET button.
The sub clip thumbnail display appears, and you can
check the new position of the sub clip.
65
5-2 Basic Operations