Command List - Sony PDW-1500 Operation Manual

7-3-1 Command List

This unit supports standard FTP commands (see the next
section), and extended FTP commands (see page 84).
Standard commands
The following table shows the standard FTP commands
supported by this unit.
Command name
USER
PASS
QUIT
PORT
PASV
TYPE
80
7-3 FTP File Operations
Description
Send this command to begin the login
process.
After sending the USER command,
send this command to complete the
login process.
Terminates the FTP connection. If a file
is being transferred, terminates after
completion of the transfer.
Specifies the IP address and port to
which this unit should connect for the
next file transfer (for data transfer from
this unit).
This command requests this unit to
"listen" on a data port (which is not its
default data port). (It puts this unit into
passive mode, waiting for the remote
computer to make a data connection.)
Specifies the type of data to be
transferred.
In the command syntax column, <SP> means a space,
entered by pressing the space bar, and <CRLF> means a
new line, entered by pressing the Enter key.
Command syntax
USER <SP> <username> <CRLF>
Input example: USER admin
PASS <SP> <password> <CRLF>
Input example: PASS pdw-1500
QUIT <CRLF>
PORT <SP> <h1,h2,h3,h4,p1,p2> <CRLF>
• h1 (most significant byte) to h4 (least significant byte): IP
address
• p1 (most significant byte), p2 (least significant byte): Port
address
Input example: PORT 10,0,0,1,242,48
(IP address: 10.0.0.1, Port number: 62000)
PASV <CRLF>
TYPE <SP> <type-code (options delimited by <SP>)>
<CRLF>
<type-code> can be any of the following. However, for
XDCAM, data is always transferred as "I," regardless of the
type-code specification.
• A: ASCII
- N: Non-print (default)
- T: Telnet format
- C: ASA Carriage Control
• E: EBCDIC
- N: Non-print
- T: Telnet format
- C: ASA Carriage Control
• I: IMAGE (Binary)
• L: LOCAL BYTE
- SIZE: byte size
Input example: TYPE I