Lutron Electronics Grafik Eye GBO-RS232 Installation And Operation Instructions

Installation and Operation Instructions
Occupant Copy
COOPERSBURG, PA 18036
PELV (CLASS 2:USA)
For use with Bang and Olufsen
systems only.
DIP Switches
GRAFIK Eye 3000 Series
Neutral
HOT/LIVE CU WIRE ONLY
SSA
Zone 3
Output Status Zone 2
Zone 1
FOR WIRING OF 4000 SERIES, REFER
LEDs
TO INSTALLATION INSTRUCTIONS
Ground Screw
LED1 LED2 1
MUX Link to
1 2 3 4
GRAFIK Eye
MUX LINK
TO GRAFIK
Control Units and
1 2 3 4
Accesory Controls
POWER INPUTS:
MUX LINK 2 (+V): 12
MUX LINK 2 (+V): 24
MUX LINK
GBO-RS232 (shown with cover removed)
GBO-RS232
R
PROGRAMMING INTERFACE
R
AUXILIARY CONTROL
®
Avant TELEVISION
™
COM
4
TxD
3
2 TX Data LED
RxD
1
(LED 3)
1 2 3 4
MUX LINK
1 2 3 4 5
RS232 LINK
RS232 Link
(to Avant
1 2 3 4 5
2 3 4 5 6 7 8
Television)
TO AVANT
EYE TELEVISION
1 2 3 4 5
(3000 SERIES)
(4000 SERIES)
RS232 LINK
GBO-RS232 Interface Control
Class 2/PELV Device
Description
The GBO-RS232 Interface allows up to 8 GRAFIK Eye Control
Units to be interfaced with your Bang & Olufsen
Television. The GBO-RS232 enables your Home Theater to
execute "ON" & "OFF" commands.
Note: Only one GBO-RS232 can be installed on the same
MUX Link.
Features
The GBO-RS232 can send RS232 commands from the Bang
& Olufsen Avant Television to a maximum of 8 GRAFIK Eye
Bang & Olufsen Series Control Units. The following com-
mands are available:
Home Theater "ON". The Avant Television turns [OFF]
and the projection system turns [ON]. This scene is prede-
fined on the GRAFIK Eye Control Unit as scene 14.
Home Theater "OFF". The Avant Television turns [ON]
and the projection system turns [OFF]. This scene is prede-
fined on the GRAFIK Eye Control Unit as scene 13.
® Avant ™