Cutting Out Unwanted Scenes - Sony DHR-1000 Operating Instructions Manual

Editing without LANC cable
Cutting out
unwanted scenes
Note
If you start recording as
soon as playback starts, the
first few seconds of the
picture and/or sound may
become distorted.
80
Editing
With this function, you can cut out unwanted scenes while making a
copy.
Before you start editing, set up the system according to the instructions
on pages 77 to 78.
Source tape
Edited tape
1
Search for the points where you
want to start playing or
recording, and set both VCRs to
stop.
2
Press r REC on this VCR while
holding down P PAUSE.
This VCR is set to recording pause.
3
Search for the point to start
playback on the other VCR, and
set it to playback pause.
For best results, pause the tape a few
seconds before the beginning of the
scene.
4
Press the pause button on the
other VCR to start playback. At
the beginning of the scene you
want to record, press P PAUSE on
this VCR to start recording.
Shuttle ring/
Jog dial
r REC
P PAUSE
A B
Unwanted scene