Connecting A Capture Board Or Video Printer - Sony DHR-1000 Operating Instructions Manual

Other editing features
Connecting a capture
board or video
printer
Note
• If your video printer does
not have an S-VIDEO input
jack, connect to the video
input jack on your video
printer with a video cable.
• If your video printer has a
LANC jack, connect the
LANC jacks on your VCR
and video printer with the
LANC cable and set LANC
MODE in the ADVANCED
OPTIONS menu on your
VCR to "S." You can print
out with the PRINT button
on the remote commander
of this VCR.
• For further instructions,
refer to the manual of the
connected equipment.
You can output a still picture to your computer using a capture board
(optional) and print out the picture using a video printer (optional).
Connecting the DVBK-1000 capture board
With this connection, you can output a still picture to your computer.
DVBK-1000 (for IBM compatible
computer)
DV connecting cable
LANC cable
For further instructions, refer to the manual of the connected
equipment.
Connecting a video printer
With this connection, you can print out a still picture.
Video printer
TV
This VCR
TV
This VCR
S-video cable
Editing
ç: Signal flow
ç: Signal flow
91