Cutting Out Unwanted Scenes - Sony VCRplus+ DHR-1000 Operating Instructions Manual

Note
e If you start recording as
soon as playback starts, the
first few seconds of the
picture and/or sound may
become distorted.
80
Editing without LANC cable
Cutting out
unwanted scenes
Editing
With this function, you can cut out unwanted scenes while making a
copy.
Before you start editing, set up the system according to the instructions
on pages 77 to 78.
Shuttle ring/
Jog dial
Edited tape
1 Search for the points where you
want to start playing or
recording, and set both VCRs to
stop.
2 Press @ REC on this VCR while
holding down II PAUSE.
This VCR is set to recording pause.
3 Search for the point to start |
playback on the other VCR, and
set it to playback pause.
For best results, pause the tape a few
seconds before the beginning of the
scene.
4 Press the pause button on the
other VCR to start playback. At
the beginning of the scene you
want to record, press Il PAUSE on
this VCR to start recording.