Presetting Desired Channels Or Disabling Unwanted Channels; Fine-Tuning - Sony SLV-595SHF Operating Instructions Manual

7 Press EXECUTE.
Receivable channels are preset in numerical
sequence. When no more channels can be found, the
presetting stops and the picture of the lowest
numbered channel is displayed on the tape counter.
"please wait" is flashing while presetting on the TV
screen.
5 Press <or> to select NORM TPNER PRESET CH 2
or CATV. NORM/CATY — eMORM CATY
NORM presets the VHF and | | AaNuat SET. eAbD ERASE
UHF channels; CATV presets H OFF
your cable TV channels. The
lowest channel number, 2 for
NORM and 1 for CATV, will
appear on the screen.
; AFT
| FINE TUNING
!
l
NOTE:
The VCR automatically exits from the TUNER PRESET
menu if you don't proceed for more than one minute.
THNER PRESET CH 2
;NORM/CATY — @HORM CATV
>| AUTO PRESET
MANUAL SET eADD ERASE
eon OFF
6 Press « or ¥ to move the
cursor to AUTO PRESET.
| FT
FINE TUNING
Presetting Desired Channels or Disabling Unwanted Channels
After automatic presetting, you can disable and/or add channels.
1 Follow steps 1 to 3 in "Presetting Ali Receivable
Channels Automatically" on page 22.
2 To disable channels, press CH +/- to select the
channel.
To add channels, press channel number buttons
(0 to 9) and ENTER key to select the channel.
; 3 To disable channels, press < or > to select ERASE.
To add channels, press < or P to select ADD.
4 Press EXECUTE.
When you press CH +/—, the disabled channels are
removed and the added channels are displayed.
Preparation | 23
sjouuey sansy oy) Guypyese |