Editing Without Lanc Cable; Connections - Sony DHR-1000 Operating Instructions Manual

Editing without LANC cable

Connections

Note
When you connect the other
VCR using the DV jack, the
data, index signals and the
contents of the cassette
memory are not
transmitted.
Notes
If you connect both LINE IN
and LINE OUT jacks of this
VCR to the other VCR,
select the input correctly to
prevent a humming noise.
If you connect the cables to
both the LINE-1 IN VIDEO
and LINE-1 IN S-VIDEO
jacks , the signal from the
S-VIDEO jack is sent to the
VCR and "S" lights in the
display window. If you
want to use the video signal
from the VIDEO jack, set L1
IN VIDEO in the
ADVANCED OPTIONS
menu to "NORM" (page
54).
Note
• Distorted signals (e.g. when
played back at a speed other
than normal) will not be
recorded properly.
If the other VCR has a lLANC jack, see page 64.
To a digital VCR with DV jack
With this connection, you can edit tapes with high-quality video and
audio.
Player
Digital VCR (Camcorder)
DV connecting cable (not supplied)
To a VCR without DV jack
If you do not need to change connections frequently, connect to the
LINE-1 IN jacks on the rear of this VCR.
Player
The other VCR
S-video cable (supplied, when the
other VCR has a S VIDEO OUT jack)
Audio/video cable (supplied)
Recorder
TV
ç: Signal flow
Recorder
TV
This VCR
ç: Signal flow
(continued)
Editing
This VCR
77