Sony DHR-1000 Operating Instructions Manual page 90

Other editing features
Connecting a titler or editing
controller (continued)
Notes
When you connect an
editing controller with the
DV connection, you cannot
connect a titler or a digital
SEG in addition.
If you use an RM-E1000 as
the editing controller, and
this VCR is set up as the
recording machine without
the DV connection,
occasionally, editing may
start about one second later
than the IN point. In this
case, try changing the
player search mode (FF/
REW or CUE/REV) on the
editing controller.
Connections differ
depending on the controller
model. Refer to the manual
of the connected equipment.
To use a controller
equipped with a titler
function, you need to make
audio/video connections in
addition to the connection
shown on the right. While
recording, press INPUT
SELECT on this VCR to
select the video that you
want to record.
90
Editing
Connecting an editing controller
Another VCR
DV connecting cable
LANC
cable
To LANC jack
Preparation
• When you make the LANC connection, follow "Connections" on page
64.
• When you don't make the LANC connection, follow "Connections" on
page 77.
For further instructions, refer to the manual of the connected
equipment.
TV
LANC
cable
Editing
controller
To LANC jack
This VCR
ç: Signal flow