Sony DHR-1000 Operating Instructions Manual page 55

Note
• When you connect a video
printer and use the PRINT
button on the remote
commander supplied with
this VCR, set LANC MODE
to "S."
Menu choices
Initial settings are indicated r mark.
Page 1
Menu option
AUTO ANT SEL
AUTO STEREO
LANC MODE
SHUTTLE MODE
JOG WITH SOUND
EDIT WINDOW
Set this option to
r ON if your TV is connected only to VHF/
UHF OUT on the VCR. To play a tape,
set the TV to the VCR channel (channel 3
or 4).
OFF if your TV is connected to both
VHF/UHF OUT and LINE OUT on the
VCR. To play a tape, set the TV to VCR
input.
r ON to receive stereo programs.
OFF to reduce noise in a stereo program.
Although the sound may improve, the
sound becomes monaural.
r M to control another VCR from this VCR
using the l LANC connection.
S to control this VCR from another
equipment using the l LANC
connection.
A to control, via the l LANC connection
a VCR that doesn't have a reverse slow
motion function.
r B to control, via the l LANC connection
VCR that has a reverse slow motion
function.
ON to listen to the sound when playing
the tape frame by frame or at a slower
speed than normal.
r OFF to turn off the sound.
r ON to turn on the on-screen window
display for assemble editing.
OFF to turn off the on-screen window
display for assemble editing.
Additional Operations
55