Sony DHR-1000 Operating Instructions Manual page 83

Tips
To execute V.O.S (video on
sound) editing:
1 Record the audio.
2 Follow the insert editing
procedure to record the
video.
You can insert audio with
the video by pressing the
STEREO 1 INSERT or/and
STEREO 2 INSERT button(s)
in step 4.
If you do not want to stop
insert editing when the
counter comes to
"0H00M00S," change the
counter display to the time
code.
5
Locate the playback start point of
the source tape (C), then set the
VCR to playback pause.
For best results, pause the tape a few
seconds before the beginning of the
scene.
6
Press the pause button on the
other VCR to start playback. At
the beginning of the scene you
want to replace, press P PAUSE
on this VCR to start recording.
Video insert editing starts.
When the tape counter reaches
"0H00M00S," recording stops
automatically.
7
Press p STOP on the other VCR.
83
Editing