Teaching The Rm-Vlz620 New Functions (Learning Function) - Sony RM-VLZ620 Operating Instructions Manual

Teaching the RM-
VLZ620 New Functions
(Learning Function)
If you cannot control a device, even
after correctly setting the
manufacturer's code, you can teach
the RM-VLZ620 new functions by
using the original remote control
supplied with the device.
You can teach a function to all the
buttons (except SET) for any device
mode.
To teach the Device Select or
SYSTEM CONTROL buttons, see
page 24.
You may find it useful to write down
the functions you have taught.
Notes
 Use new batteries in both remote control
units.
 Certain remote control signals may not be
learned.
 If the function has already been learned, it
will be overwritten with the new one.
 You cannot teach a number button to
which you have already assigned a channel
(page 27).
 You can also teach the signals of a
computer's remote control (including a
built-in tuner type) to control the monitor.
 If you do not perform learning steps for 10
seconds at any point during the process,
the learning procedure is canceled.
20
Example: To teach a function
to the  (play) button in DVD
mode
1
Place the RM-VLZ620 head
to head with your device's
remote control.
Remote control for
your device
About 3 – 8 cm
(1 – 3 in.) away
SET/SET
indicator
Device
Select
buttons
, 8
RM-VLZ620