Setting The Speed Of The Camera Moving To A Preset Position (Brc-300/300P, Brc-H700 And Brc-Z700 Only); Using The Function Stored In The Memory Of The Rm-Br300; Setting A Limit On The Maximum Panning/Tilting Speed (Brc-300/300P, Brc-H700 And Brc- Z700 Only) - Sony RM-BR300 - Remote Control Unit Operating Instructions Manual

Setting the Speed of the Camera
Moving to a Preset Position (BRC-
300/300P, BRC-H700 and BRC-Z700
only)
You can select the panning/tilting speed when the
camera moves to a preset position.
1
Press the CAMERA button to select the camera
whose speed you want to set.
2
Press the POSITION button for which you want to
set the speed for more than one second.
All the CAMERA buttons, 1 to 7, flash.
3
Press one of the CAMERA buttons to select the
speed.
CAMERA button Panning/tilting speed
1 1 degree/sec.
2 2.2 degrees/sec.
3 4.8 degrees/sec.
4 11 degrees/sec.
5 23.3 degrees/sec.
6 43 degrees/sec.
7 60 degrees/sec. (default)
Now the camera will move to the position preset to
the pressed POSITION button with the selected
speed.
To set the speed of the camera moving to
a preset position for the BRC-H700 or
BRC-Z700
To set the speed of the camera moving to a preset
position between 9 and 16, hold down the SHIFT button
and press the corresponding POSITION button.
Using the Function
Stored in the Memory of
the RM-BR300
The following function for panning/tilting operations
with the RM-BR300 is stored in the memory of this unit.
Setting a Limit on the Maximum
Panning/Tilting Speed (BRC-300/
300P, BRC-H700 and BRC-Z700
only)
You can limit the panning/tilting speed obtained when
you incline the joystick at the maximum angle.
1
Hold the PAN-TILT RESET button for more than a
second while pressing the SHIFT button.
All of the CAMERA buttons 1 to 7 flash.
2
Press the CAMERA button corresponding to the
speed you want to set, as shown in the table below.
CAMERA button Maximum panning/tilting
speed
1 3.5 degrees/sec.
2 6.4 degrees/sec.
3 11 degrees/sec.
4 18.3 degrees/sec.
5 29 degrees/sec.
6 43 degrees/sec.
7 60 degrees/sec.
Only the CAMERA button you pressed flashes, and
the corresponding maximum panning/tilting speed
is set.
Note
If you use another RM-BR300 or you connect another
camera to this unit, set a limit on the maximum panning/
tilting speed again.

Using the Function Stored in the Memory of the RM-BR300

15
GB