Checking The Manufacturer's Code You Have Set - Sony RM-VLZ620 Operating Instructions Manual

6
When the device turns off,
release the button.
If you overshoot the required
code, you can search for the next
or previous code using the 
or  button.
7
Press .
The SET indicator flashes three
times, and the indicators turn off.
3 flashes
To cancel the process
Press SET anytime.
Notes
 If all codes have been cycled through once,
the SET indicator and selected Device
Select button flash once and turn off.
 If the setting is incomplete, the SET
indicator flashes once and the indicators
turn off.
 If you still cannot operate the device, even
after setting the manufacturer's code using
the Search function, another code may be
available. Repeat the above steps to search
for another code that works for most
functions of your device.
16
Checking the
manufacturer's code you
have set
You can check the manufacturer's
code number you have set.
Example: To check the code
number (50831) you have set
for the TV
1
Press and hold SET for more
than 3 seconds.
While keeping SET held
down, press the desired
Device Select button, then
release both buttons.
The selected Device Select button
lights up.
2
Enter  -  - .
The SET indicator flashes three
times to indicate that the setting
mode has been entered.
3 flashes
3
Press .
The SET
indicator
lights up.