Table of Contents
Advertisement
Quick Links
Operation Manual
Post Hole Digger
ARTICEL 61197
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps and technical data can differ
insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities please contact us.
© by WilTec Wildanger Technik GmbH
Seite 23
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Advertisement
Table of Contents
Related Manuals for WilTec ARTICEL 61197
Summary of Contents for WilTec ARTICEL 61197
- Page 1 Due to further developments, illustrations, functioning steps and technical data can differ insignificantly. Updating the documentation If you have suggestions for improvement or have found any irregularities please contact us. © by WilTec Wildanger Technik GmbH Seite 23 http://www.WilTec.de http://www.aoyue.eu...
- Page 2 The information contained in this document is subject to change without prior notice. No part of this document can be copied or duplicated in another form without the prior written consent of WilTec Wildanger Technik GmbH. The WilTec Wildanger Technik GmbH assumes no liability for any errors in this user manual or the connection diagram.
- Page 3 IMPORTANT! IT IS ESSENTIAL THAT YOU READ THE INSTRUCTIONS IN THIS MANUAL BEFORE OPERATING THIS MACHINE © by WilTec Wildanger Technik GmbH Seite 25 http://www.WilTec.de http://www.aoyue.eu http://www.teichtip.de...
- Page 4 Save the op- erator’s manual and review it frequently to be able to continue a safe operation and instruct others who use this tool. © by WilTec Wildanger Technik GmbH Seite 26 http://www.WilTec.de http://www.aoyue.eu http://www.teichtip.de...
-
Page 5: General Safety Rules
It is presently unknown what may contribute to the condition. There are mea- sures that can be taken by the operator to possibly reduce the effects of vibrations: © by WilTec Wildanger Technik GmbH Seite 27 http://www.WilTec.de http://www.aoyue.eu... - Page 6 Never carry the power drill with the engine running. Carry the power drill with the engine stopped and with the auger bit removed. © by WilTec Wildanger Technik GmbH Seite 28 http://www.WilTec.de http://www.aoyue.eu http://www.teichtip.de...
- Page 7 Use synthetic 2-stroke oil for air cooled engines. Mix petrol and oil Mix the fuel mix thoroughly and also each time before refueling. Switch On/Off Switch I=ON to run O=OFF to stop © by WilTec Wildanger Technik GmbH Seite 29 http://www.WilTec.de http://www.aoyue.eu http://www.teichtip.de...
- Page 8 Indicates a potentially hazardous situation, which will result in death or serious injury if not avoided. (Without safety alert symbol) Indicates a situation that may result in property damage. © by WilTec Wildanger Technik GmbH Seite 30 http://www.WilTec.de http://www.aoyue.eu http://www.teichtip.de...
-
Page 9: Packing List
The driveshaft is connected to attachments to transfer movement. ENGINE SWITCH The engine switch is used in combination with the recoil starter grip to start the engine. It is also used to turn the engine off. © by WilTec Wildanger Technik GmbH Seite 31 http://www.WilTec.de http://www.aoyue.eu... -
Page 10: Specifications
Idle Speed 2800+-200rpm Clutch Engagement Speed 3900+-200rpm Maximum Engine Speed 8800+-200rpm Ignition Transistor magneto CDI Weight 9.8 KG Fuel Tank Volume 0.98 L Auger Diameter 150mm, 200mm Extension Shaft 300mm © by WilTec Wildanger Technik GmbH Seite 32 http://www.WilTec.de http://www.aoyue.eu http://www.teichtip.de... - Page 11 WARNING! Do not change the ratio of the reduction gearbox. The characteristics of the machine could change and unforeseen reactions could occur. © by WilTec Wildanger Technik GmbH Seite 33 http://www.WilTec.de http://www.aoyue.eu http://www.teichtip.de...
-
Page 12: Operation
Do not use any type of pre-mixed petrol/oil intended for use in mopeds, motorcycles, etc.. Use synthetic 2-stoke oil only. Do not use automotive oil or 2-stroke outboard oil. © by WilTec Wildanger Technik GmbH Seite 34 http://www.WilTec.de http://www.aoyue.eu... -
Page 13: Filling The Tank
PRIME-press the primer bulb 10 times slowly. SET the choke lever to “START” position. Lock on the throttle by pulling the throttle trigger and pressing in the lock button. © by WilTec Wildanger Technik GmbH Seite 35 http://www.WilTec.de http://www.aoyue.eu http://www.teichtip.de... -
Page 14: To Stop The Engine
Note: Your post hole digger is supplied with a 300mm extension shaft to be used for deeper hole digging. Do not start digging a hole with the extension shaft attached. © by WilTec Wildanger Technik GmbH Seite 36 http://www.WilTec.de http://www.aoyue.eu... -
Page 15: Maintenance
If you notice a power loss with your petrol powered tool, a qual- ified and authorized technician will need to remove these deposits to restore power. © by WilTec Wildanger Technik GmbH Seite 37 http://www.WilTec.de http://www.aoyue.eu... -
Page 16: Cleaning Air Filter
CENTRE. SPARK PLUG REPLACEMENT See figure 11 This engine uses an NGK BPMR6A or Champion RCJ6Y spark plug with 0.50mm electrode gap. Use an exact replacement and replace annually. © by WilTec Wildanger Technik GmbH Seite 38 http://www.WilTec.de http://www.aoyue.eu http://www.teichtip.de... - Page 17 Abide by all ISO and local regulations for the safe storage and handling of petrol. WHEN STORING FOR 1 MONTH OR LONGER Drain all fuel from the tank into a container approved for petrol. Run the engine until it stops. © by WilTec Wildanger Technik GmbH Seite 39 http://www.WilTec.de http://www.aoyue.eu...
-
Page 18: Troubleshooting
Use fresh fuel and the correct synthetic 2-stroke oil mix. the muffler mixture. Air filter is Clean following the instructions in the maintenance section. dirty. Figures for Illustration © by WilTec Wildanger Technik GmbH Seite 40 http://www.WilTec.de http://www.aoyue.eu http://www.teichtip.de... - Page 19 © by WilTec Wildanger Technik GmbH Seite 41 http://www.WilTec.de http://www.aoyue.eu http://www.teichtip.de...
- Page 20 Mounting is complete as shown. push down the opposite end until the grill clicks in position. Cooling air direction without deflec- Cooling air direction with deflector tor grill fitted grill fitted Working principle © by WilTec Wildanger Technik GmbH Seite 42 http://www.WilTec.de http://www.aoyue.eu http://www.teichtip.de...
-
Page 21: Disposal Regulations
All WilTec electric devices that fall under the WEEE regulations are labelled with the crossed-out wheeled waste bin logo. This logo indicates that this electric equipment must not be disposed with the domestic waste.