Advertisement
Quick Links
Operation Manual
Steel Compressed-air Hose Reel
65438–65439
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps, and technical data can differ insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for WilTec 65438
Summary of Contents for WilTec 65438
- Page 1 Operation Manual Steel Compressed-air Hose Reel 65438–65439 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps, and technical data can differ insignificantly.
- Page 2 All rights re- served. The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this operating manual, nor in the diagrams and figures shown.
- Page 3 • Avoid bending or kinking the hose excessively, as this can reduce its lifespan. • Ensure the hose reel is securely mounted to prevent it from falling. © by WilTec Wildanger Technik GmbH Item 65438–65439 Page 3 http://www.wiltec.de 07 2024-1...
- Page 4 Air hose (15 m) ST6.3 × 45 mm lag bolt Lead hose (1.5 m) Bottom base plate Air inlet Air outlet Hose guide Stop ball Roller bracket Screw Reel bracket © by WilTec Wildanger Technik GmbH Item 65438–65439 Page 4 http://www.wiltec.de 07 2024-1...
- Page 5 4. Wrap 3–5 layers of sealant tape around both male ends of the lead hose (C) and attach one end to the air inlet (E). Use a ⅜″ (10 mm) wrench to tighten them together. © by WilTec Wildanger Technik GmbH Item 65438–65439 Page 5 http://www.wiltec.de...
- Page 6 Mount the hose reel in a protected location to preserve and protect the performance of the hose and reel. • The hose must not come into contact with corrosive chemicals or liquids. • Always rewind the hose when it is not in use. © by WilTec Wildanger Technik GmbH Item 65438–65439 Page 6 http://www.wiltec.de 07 2024-1...
-
Page 7: Troubleshooting
Important notice: The reprint or reproduction, even of excerpts, and any commercial use, even in part, of this instruction manual require the written permission of WilTec Wildanger Technik GmbH. © by WilTec Wildanger Technik GmbH Item 65438–65439 Page 7 http://www.wiltec.de...
Need help?
Do you have a question about the 65438 and is the answer not in the manual?
Questions and answers