Table of Contents
Advertisement
Quick Links
Operation Manual
Petrol Ground Drill
61197
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps and technical data can differ insignific -
antly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.
Advertisement
Table of Contents
Related Manuals for WilTec 61197
Summary of Contents for WilTec 61197
- Page 1 Operation Manual Petrol Ground Drill 61197 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps and technical data can differ insignific - antly.
- Page 2 All rights reserved. The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this operating manual, nor in the diagrams and figures shown.
-
Page 3: General Safety Rules
Keep all parts of your body away from any moving part. • Do not touch area around the muffler or cylinder of the drill because these parts get hot from • operation. © by WilTec Wildanger Technik GmbH Item 61197 Page 3 http://www.WilTec.de http://www.aoyue.eu 11 2020-1 http://www.teichtip.de... - Page 4 Stop the engine and allow it to cool before refuelling or storing the unit. • Allow the engine to cool; empty the fuel tank and secure the unit from moving before trans- • porting it in a vehicle. © by WilTec Wildanger Technik GmbH Item 61197 Page 4 http://www.WilTec.de http://www.aoyue.eu 11 2020-1 http://www.teichtip.de...
- Page 5 Store the power drill off the ground in a vertical position in a dry place and with an empty fuel tank. If the auger bit jams, stop the engine immediately. © by WilTec Wildanger Technik GmbH Item 61197 Page 5 http://www.WilTec.de http://www.aoyue.eu 11 2020-1 http://www.teichtip.de...
-
Page 6: Symbols And Their Meaning
Mix petrol and oil Mix the fuel mix thoroughly and also each time before refuelling. Switch On/off switch I = on (to run) O = off (to stop) © by WilTec Wildanger Technik GmbH Item 61197 Page 6 http://www.WilTec.de http://www.aoyue.eu 11 2020-1... -
Page 7: Maintenance
Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such action or modification is misuse and could result in a hazardous condition lead - ing to possible serious personal injury. © by WilTec Wildanger Technik GmbH Item 61197 Page 7 http://www.WilTec.de... -
Page 8: Parts Names And Functions
Exhaust pupe Engine switch Air box Gudgeon pin locator hole Throttle lock Choke lever Driveshaft Trigger lock Left hand grip Gearbox Right hand grip Primer bulb © by WilTec Wildanger Technik GmbH Item 61197 Page 8 http://www.WilTec.de http://www.aoyue.eu 11 2020-1 http://www.teichtip.de... - Page 9 The throttle trigger helps the operator control the speed of the auger to suit various ground conditions. Trigger lock The trigger lock prevents the operator from accidentally activating the throttle trigger. The trigger lock must be depressed before applying the throttle. © by WilTec Wildanger Technik GmbH Item 61197 Page 9 http://www.WilTec.de http://www.aoyue.eu...
- Page 10 CAUTION! Do not change the ratio of the reduction gearbox. The characteristics of the machine could change and unforeseen reactions could occur. © by WilTec Wildanger Technik GmbH Item 61197 Page 10 http://www.WilTec.de http://www.aoyue.eu...
-
Page 11: Working Rules
This engine is certified to operate on unleaded petrol intended for automotive use with an • octane rating of 90 ([R+M]/2) or higher. Do not use fuels containing Ethanol. The use of ethanol fuels may void your warranty. • © by WilTec Wildanger Technik GmbH Item 61197 Page 11 http://www.WilTec.de http://www.aoyue.eu 11 2020-1 http://www.teichtip.de... -
Page 12: Filling The Tank
Move at least 9 m away from the refuelling site before starting the engine. Do not smoke! Mixing ratio: 1 ℓ + 20 mℓ= 2 ℓ + 40 mℓ= 3 ℓ + 60 mℓ= 4 ℓ + 80 mℓ= 5 ℓ +100 mℓ= © by WilTec Wildanger Technik GmbH Item 61197 Page 12 http://www.WilTec.de http://www.aoyue.eu 11 2020-1 http://www.teichtip.de... -
Page 13: Starting And Stopping
With the engine switch being on position “I”, pull on the starter cable with a quick, firm and • regular upward movement until the engine runs. Note! Do not use the choke lever to start a hot engine. • © by WilTec Wildanger Technik GmbH Item 61197 Page 13 http://www.WilTec.de http://www.aoyue.eu 11 2020-1 http://www.teichtip.de... - Page 14 How to cut off the engine Press the engine switch to “O”. Wait until the engine has stopped. © by WilTec Wildanger Technik GmbH Item 61197 Page 14 http://www.WilTec.de http://www.aoyue.eu 11 2020-1 http://www.teichtip.de...
- Page 15 Keep a comfortable distance between you and the drill, without leaning too far forward. Always give your full attention to your work. Touching the rotating auger can result in serious injury. © by WilTec Wildanger Technik GmbH Item 61197 Page 15 http://www.WilTec.de http://www.aoyue.eu 11 2020-1 http://www.teichtip.de...
-
Page 16: Reduction Gear
If you experience any loss of performance from your gasoline powered tools, a qualified and authorized technician must remove these deposits to restore performance. © by WilTec Wildanger Technik GmbH Item 61197 Page 16 http://www.WilTec.de... -
Page 17: Cleaning The Air Filter
Note! Make sure the filter is properly seated in the cover. If the filter is installed incorrectly, dirt can enter the engine, which leads to rapid engine wear. Refit the air filter cover and tighten the fastening screw. © by WilTec Wildanger Technik GmbH Item 61197 Page 17 http://www.WilTec.de http://www.aoyue.eu... - Page 18 This engine uses a spark plug with an electrode gap of 0.5 mm. Use an identical replacement and re - place the spark plug annually. K: Spark plug B: Spark plug cap © by WilTec Wildanger Technik GmbH Item 61197 Page 18 http://www.WilTec.de http://www.aoyue.eu...
-
Page 19: Setting The Idle Speed
Follow all ISO and all local regulations for the safe storage and handling of gasoline. When stored for more than a month Drain all fuel from the tank into a gasoline-approved container. Let the engine run until it stops. © by WilTec Wildanger Technik GmbH Item 61197 Page 19 http://www.WilTec.de... -
Page 20: Troubleshooting
• • Important notice : The reprint or reproduction, even of excerpts, and any commercial use, even in part of this instructions manual require the written permission of WilTec Wildanger Technik GmbH © by WilTec Wildanger Technik GmbH Item 61197 Page 20 http://www.WilTec.de... -
Page 21: Eg-Konformitätserklärung
It has been tested with the following harmonised standards: Il a été testé à partir des normes harmonisées suivantes : EN 12100 :2010 AfPS GS 2014 :01 Bevollmächtigter für die Zusammenstellung der technischen Unterlagen: Bernd Wildanger, Geschäftsführer WilTec Wildanger Technik GmbH Königsbenden 12 52249 Eschweiler Deutschland Eschweiler, 18. Juli 2016...