Download
Share
Print this page
  1. Manuals
  2. Brands
  3. WilTec Manuals
  4. Tools
  5. 64757
  6. Operating instructions manual

WilTec 64757 Operating Instructions Manual

4-in-1 multi gardening tool with 4-stroke motor
Hide thumbs

Advertisement

Quick Links

Download this manual
Operating instructions
4-in-1 Multi Gardening Tool with 4-stroke Motor
64757
Illustration similar, may vary depending on model
Please read and follow the operating instructions and safety information prior to initial operation.
Technical changes reserved!
Illustrations, functional steps, and technical data may deviate insignificantly due to continuous further
developments.

Advertisement

loading
Need help?

Need help?

Do you have a question about the 64757 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for WilTec 64757

Summary of Contents for WilTec 64757

  • Page 1 Operating instructions 4-in-1 Multi Gardening Tool with 4-stroke Motor 64757 Illustration similar, may vary depending on model Please read and follow the operating instructions and safety information prior to initial operation. Technical changes reserved! Illustrations, functional steps, and technical data may deviate insignificantly due to continuous further...
  • Page 2 The information contained in this document may alter at any time without prior notice. No part of this document may be copied or otherwise duplicated without prior written consent. All rights reserved. WilTec Wildanger Technik GmbH cannot be held liable for any possible mistakes in this operating man- ual, nor in the diagrams and illustrations shown.
  • Page 3 Children should be supervised to ensure that they do not play with the device. © by WilTec Wildanger Technik GmbH Item 64757 Page 3 http://www.wiltec.de...
  • Page 4 If you slip or fall on the ground or in a hole, release the throttle immediately. • Be careful not to drop the machine or hit it against obstacles. © by WilTec Wildanger Technik GmbH Item 64757 Page 4 http://www.wiltec.de...
  • Page 5 Therefore, be especially careful when handling fuel and ensure adequate ventilation. • WARNING! If you observe the following precautions, you will reduce the risk of fire: © by WilTec Wildanger Technik GmbH Item 64757 Page 5 http://www.wiltec.de 10 2023-1...
  • Page 6 Operating the device for a long period of time without a break can be harmful to health due to vibrations; furthermore, a poorly maintained or incorrectly operated device can be harmful to health. © by WilTec Wildanger Technik GmbH Item 64757 Page 6 http://www.wiltec.de...
  • Page 7 Saw-chain Curved handle Starting motor Gear housing Ignition switch Cutting-thread housing Chain cover Throttle cable Gear housing Blade Throttle lever Protective shield Gear housing Throttle cable Blade © by WilTec Wildanger Technik GmbH Item 64757 Page 7 http://www.wiltec.de 10 2023-1...
  • Page 8 Press the primer button all the way down 5 times and release — it again. All relevant directives that apply to CE marking and the prod- — uct are fulfilled. © by WilTec Wildanger Technik GmbH Item 64757 Page 8 http://www.wiltec.de 10 2023-1...
  • Page 9 This may result in a risk of serious injury. Therefore, remove the spark-plug connector when the machine is not under supervision. • WARNING! Defective knives can increase the risk of accidents. © by WilTec Wildanger Technik GmbH Item 64757 Page 9 http://www.wiltec.de 10 2023-1...
  • Page 10 0.7 / 6500 0.7 / 6500 1.0 / 6500 Tank volume (ℓ) 0.65 Empty weight (㎏) Carburettor Diaphragm Ignition Contact-free electronic ignition Starting procedure Pull starter Fuel Petrol © by WilTec Wildanger Technik GmbH Item 64757 Page 10 http://www.wiltec.de 10 2023-1...
  • Page 11 Always move the machine about 3 m away from the refuelling point before starting it. Place the device on a solid surface. Remember that the blades may already be moving when the engine © by WilTec Wildanger Technik GmbH Item 64757 Page 11 http://www.wiltec.de...
  • Page 12 Make sure that your hair does not hang down over your shoulder. • Never work from a ladder, stool, or other elevated position that is not fully secured. © by WilTec Wildanger Technik GmbH Item 64757 Page 12 http://www.wiltec.de 10 2023-1...
  • Page 13 The attachment is extremely sharp and can easily cause cuts. • Always keep the device out of children’s reach. • Only use original spare parts for repairs. © by WilTec Wildanger Technik GmbH Item 64757 Page 13 http://www.wiltec.de 10 2023-1...
  • Page 14 • Never bring the blades close to body parts while working. • Do not attach the blade guard until the device is switched off. © by WilTec Wildanger Technik GmbH Item 64757 Page 14 http://www.wiltec.de 10 2023-1...
  • Page 15 If the cutter becomes excessively hot during operation, lubricate the inner surfaces of the blade with special oil. WARNING! This operation must only be carried out when the blades have stopped running and the engine is switched off. © by WilTec Wildanger Technik GmbH Item 64757 Page 15 http://www.wiltec.de 10 2023-1...
  • Page 16 “Maintenance.” The user may only carry out the maintenance and service work described in this manual. Further work must be carried out by a specialist workshop. © by WilTec Wildanger Technik GmbH Item 64757 Page 16 http://www.wiltec.de...
  • Page 17 Checking and cleaning the spark arrester grid on the ex- haust (only applies to mufflers with catalytic converter) Clearing the exhaust and engine of dirt, leaves, and excess lubricant, etc. to reduce the risk of fire © by WilTec Wildanger Technik GmbH Item 64757 Page 17 http://www.wiltec.de...
  • Page 18 Never use the device when you are tired, under the influence of alcohol or medication. Your vision, judgement, or coordination may be affected. • Never use the device in extreme weather conditions such as severe cold, very hot, and/or humid climates. © by WilTec Wildanger Technik GmbH Item 64757 Page 18 http://www.wiltec.de 10 2023-1...
  • Page 19 If you need to work within this safety distance, you should always contact the relevant power-supply company to ensure that the power is switched off before you start work. © by WilTec Wildanger Technik GmbH Item 64757 Page 19 http://www.wiltec.de...
  • Page 20 Retighten all nuts, bolts, and screws except the carburettor adjustment screws after each use. For maintenance work, please also refer to the maintenance schedule in this manual. © by WilTec Wildanger Technik GmbH Item 64757 Page 20 http://www.wiltec.de...
  • Page 21 Be careful of falling branches. Note that a branch can bounce off the ground after impact. Risk of injuries! Removing the cut branches Do not throw the cuttings in the rubbish bin. Feed it into the composting process. © by WilTec Wildanger Technik GmbH Item 64757 Page 21 http://www.wiltec.de 10 2023-1...
  • Page 22 (3) and then make a cross-section at a distance of about 20 cm (A) from the last cut. Then make the next cut (4), starting with a relief cut and end- ing with a cross cut. © by WilTec Wildanger Technik GmbH Item 64757 Page 22 http://www.wiltec.de...
  • Page 23 • Replace the cover and screw the nut hand-tight. Now continue with “Tighten the chain.” © by WilTec Wildanger Technik GmbH Item 64757 Page 23 http://www.wiltec.de 10 2023-1...
  • Page 24 Do not use waste oil. Repeated contact with used oil can cause skin cancer. Moreover, waste oil is harmful to the environment. Used oil does not have the necessary lubricating properties and is not suitable for chain lubrication. © by WilTec Wildanger Technik GmbH Item 64757 Page 24 http://www.wiltec.de...
  • Page 25 Each new chain must be run in for about 2–3 min. After running in the chain, check the chain ten- sion and adjust it if necessary – see “Checking the chain tension.” © by WilTec Wildanger Technik GmbH Item 64757 Page 25 http://www.wiltec.de...
  • Page 26 WARNING! To quickly release the pole pruner from the shoulder strap, pull the quick re- lease upwards. Controls № Name Throttle lock Butterfly valve Slide control © by WilTec Wildanger Technik GmbH Item 64757 Page 26 http://www.wiltec.de 10 2023-1...
  • Page 27 Your machine is now ready for operation. Switch off engine WARNING! Move the slider in the direction of the arrow to STOP. © by WilTec Wildanger Technik GmbH Item 64757 Page 27 http://www.wiltec.de 10 2023-1...
  • Page 28 • Always leave the chain slack when the work is done. The chain contracts when it cools down. If not loosened, it may damage the gear shaft and bearings. © by WilTec Wildanger Technik GmbH Item 64757 Page 28 http://www.wiltec.de...
  • Page 29 Always press the spark plug connector (1) firmly onto the spark-plug connector (2) with the correct size. (Note: If the connection has a removable SAE adaptor nut, this must be fitted.) © by WilTec Wildanger Technik GmbH Item 64757 Page 29 http://www.wiltec.de...
  • Page 30 Therefore, it is best to remove the chain from the bar and resharpen it on a suit- able sharpening device. © by WilTec Wildanger Technik GmbH Item 64757 Page 30 http://www.wiltec.de...
  • Page 31 Find the shortest link and then file all the other links back to the same height. It is best to have this work done with an electric grinder in a workshop. © by WilTec Wildanger Technik GmbH Item 64757 Page 31 http://www.wiltec.de...
  • Page 32 The following maintenance periods apply only to normal operating conditions. If your daily working time is longer or the operating conditions are difficult (very dusty work area, etc.), shorten the specified periods accordingly. © by WilTec Wildanger Technik GmbH Item 64757 Page 32 http://www.wiltec.de...
  • Page 33 Chain sion Sharpen Check lubrication Check (wear, damage) Guide bar Clean and turn over Deburr Replace. Chain sprocket Checking Have replaced by spe- cialist Safety sticker Replace © by WilTec Wildanger Technik GmbH Item 64757 Page 33 http://www.wiltec.de 10 2023-1...
  • Page 34 Do not smoke when mixing or refilling fuel. Use unleaded petrol intended for use in motor vehicles and Fuel having an octane rating of 91 ([R+M]/2) or higher. © by WilTec Wildanger Technik GmbH Item 64757 Page 34 http://www.wiltec.de 10 2023-1...
  • Page 35 Never touch the nylon cutting head when the motor is running. If you need to adjust the guard or nylon cutting head, stop the engine and make sure that the nylon cutting head stops running. © by WilTec Wildanger Technik GmbH Item 64757 Page 35 http://www.wiltec.de...
  • Page 36 0.7 / 6500 0.7 / 6500 1.0 / 6500 Tank volume (ℓ) 0.65 Empty weight (㎏) Carburettor Diaphragm Ignition Contact-free electronic ignition Starting procedure Pull starter Fuel Petrol © by WilTec Wildanger Technik GmbH Item 64757 Page 36 http://www.wiltec.de 10 2023-1...
  • Page 37 Attaching the plastic shield Attach the safety cover to the handle using the safety-cover bracket and screws provided. Tighten the screws after placing the safety-cover bracket in the correct position. © by WilTec Wildanger Technik GmbH Item 64757 Page 37 http://www.wiltec.de...
  • Page 38 Read the user manual carefully. Familiarise yourself thoroughly with the controls and proper use of the device. You need to know how to stop the device and turn off the engine, and how to quickly unbuckle a device hanging on the strap. © by WilTec Wildanger Technik GmbH Item 64757 Page 38 http://www.wiltec.de...
  • Page 39 If the device is not balanced, adjust the harness suspension and the handle until the device is balanced. WARNING! CAUTION! The hook should be at the level of your right hip, the quick-release fastener on the outside. © by WilTec Wildanger Technik GmbH Item 64757 Page 39 http://www.wiltec.de 10 2023-1...
  • Page 40 In case of danger, immediately stop the lawn trimmer and pull the quick-release latch to release the lawn trimmer from your body. Cutting with the nylon-thread head Debris Thread cutter on right Counterclockwise Cut on this side. side movement © by WilTec Wildanger Technik GmbH Item 64757 Page 40 http://www.wiltec.de 10 2023-1...
  • Page 41 WARNING! CAUTION! Do not use a steel blade for free cutting or edge trimming! © by WilTec Wildanger Technik GmbH Item 64757 Page 41 http://www.wiltec.de...
  • Page 42 If an obstacle cannot be removed, mark it to be able to avoid it with the blade. Stones © by WilTec Wildanger Technik GmbH Item 64757 Page 42 http://www.wiltec.de...
  • Page 43 Avoid any pressure or leverage that could cause the blade to get stuck or break. Do not cut down trees that are Sawing off young trees Jamming of the saw blade too thick! © by WilTec Wildanger Technik GmbH Item 64757 Page 43 http://www.wiltec.de 10 2023-1...
  • Page 44 Make sure that the protective shield is firmly in place. • Make sure that no fuel leaks out. • Make sure that the blade is not cracked. Starting and stopping the engine © by WilTec Wildanger Technik GmbH Item 64757 Page 44 http://www.wiltec.de 10 2023-1...
  • Page 45 • Ensure that all guards, harnesses, shields, and handles are properly and securely fastened to avoid risk of injury. Choke Filter-cover knob © by WilTec Wildanger Technik GmbH Item 64757 Page 45 http://www.wiltec.de 10 2023-1...
  • Page 46 Replace the spark plug when the centre electrode has become round at the end. • Spark gap: 0.6–0.7 mm (0.023″–0.028″) • Tightening torque: 145–155 kg-cm (125–135 in.lb) © by WilTec Wildanger Technik GmbH Item 64757 Page 46 http://www.wiltec.de 10 2023-1...
  • Page 47 Do not store the product in an enclosed area where fuel vapours can reach an open flame from water heaters, heaters, stoves, etc. Store it only in a closed, well-ventilated area. © by WilTec Wildanger Technik GmbH Item 64757 Page 47 http://www.wiltec.de...
  • Page 48 Retighten. Leakage in crankcase Remove. Compression normal Poor contact between Tighten spark-plug cap. high-voltage wire spark plug Failure of stop switch or Repair or replace. short circuit © by WilTec Wildanger Technik GmbH Item 64757 Page 48 http://www.wiltec.de 10 2023-1...
  • Page 49 Clean. short circuit High-voltage wire dropped Reconnect. Important note: Reproduction and any commercial use (of parts) of this operating manual, requires a written permission of WilTec Wildanger Technik GmbH. © by WilTec Wildanger Technik GmbH Item 64757 Page 49 http://www.wiltec.de...