Advertisement
Quick Links
Operation Manual
Cable Drum
65436–65437
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps, and technical data can differ insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for WilTec 65436
Summary of Contents for WilTec 65436
- Page 1 Operation Manual Cable Drum 65436–65437 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps, and technical data can differ insignificantly.
- Page 2 All rights re- served. The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this operating manual, nor in the diagrams and figures shown.
- Page 3 Children should be supervised to ensure that they do not play with the device. © by WilTec Wildanger Technik GmbH Item 65436–65437 Page 3 http://www.wiltec.de...
- Page 4 Wear eye protection when using power tools, such as an electric drill. Warning! Ensure there are no live electrical wires or pipes in the wall where you are drilling. © by WilTec Wildanger Technik GmbH Item 65436–65437 Page 4 http://www.wiltec.de...
- Page 5 5 mm between the wall and the screw head. 6. Hang the cable reel on the screws (see illustration). 7. Tighten the screws securely. 8. Connect the power plug to the power source. © by WilTec Wildanger Technik GmbH Item 65436–65437 Page 5 http://www.wiltec.de...
- Page 6 Always hold the cable while it is rewinding to avoid damage to the reel. • Do not extend the cable beyond the indicator shown in the image below. The red marker indicates the end of the cable. © by WilTec Wildanger Technik GmbH Item 65436–65437 Page 6 http://www.wiltec.de...
-
Page 7: Maintenance
Tools connected to the extension cable should never be used to pull the cable. Always pull the cable itself. • Remove tools from the extension cable after use. Do not allow tools to hang from the cable. © by WilTec Wildanger Technik GmbH Item 65436–65437 Page 7 http://www.wiltec.de... - Page 8 This logo indicates that this electric equipment must not be disposed with the domestic waste. The company WilTec Technik GmbH has been registered in the German registry EAR under the WEEE- registration number DE45283704. Disposal of used electrical and electronic appliances...
Need help?
Do you have a question about the 65436 and is the answer not in the manual?
Questions and answers