Advertisement
Operation Manual
Nail Filing Machine
61488
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps and technical data can differ insignific -
antly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for WilTec 61488
Summary of Contents for WilTec 61488
- Page 1 Operation Manual Nail Filing Machine 61488 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps and technical data can differ insignific - antly.
- Page 2 All rights reserved. The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this operating manual, nor in the diagrams and figures shown.
- Page 3 Select a proper drill bit according to the requirements and attach it to the hand piece. Turn the speed control knob to the left (towards minimum). Connect to the power supply. © by WilTec Wildanger Technik GmbH Item 61488 Page 3 http://www.WilTec.de http://www.aoyue.eu 2021-1...
- Page 4 If the supply cable is damaged it must be replaced by the manufacturer or a qualified techni- cian in order to avoid a hazard. © by WilTec Wildanger Technik GmbH Item 61488 Page 4 http://www.WilTec.de http://www.aoyue.eu...
- Page 5 All WilTec electric devices that fall under the WEEE regulations are labelled with the crossed-out wheeled waste bin logo. This logo indicates that this electric equipment must not be disposed with the domestic waste.
Need help?
Do you have a question about the 61488 and is the answer not in the manual?
Questions and answers