WilTec 61574 Operation Manual

Sheet metal folder

Operation Manual

Sheet Metal Folder

61574

Illustration similar, may vary depending on model

Read and follow the operating instructions and safety information before using for the first time.

Technical changes reserved!

Due to further developments, illustrations, functioning steps and technical data can differ insignific -

antly.

Updating the documentation

If you have suggestions for improvement or have found any irregularities, please contact us.

Table of Contents

Need help?

Do you have a question about the 61574 and is the answer not in the manual?

Page 1 Operation Manual Sheet Metal Folder 61574 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps and technical data can differ insignific - antly.
Page 3 Check the alignment and connection of the moving parts, the mounting devices and examine the device for possible broken parts or impairments on the work performance. Broken parts need to be repaired or exchanged properly by a qualified technician. © by WilTec Wildanger Technik GmbH Item 61574 Page 3 http://www.WilTec.de...
Page 4 When the work is finished , remove the pressure plate and clean the surface. Then clean the  press brake with a smooth and clean cloth and store the press brake in a safe and dry area out of the reach of children. © by WilTec Wildanger Technik GmbH Item 61574 Page 4 http://www.WilTec.de http://www.aoyue.eu...
Page 5 Folding panel Important notice: The reprint or reproduction, even of excerpts, and any commercial use, even in part of this instructions manual require the written permission of WilTec Wildanger Technik GmbH. © by WilTec Wildanger Technik GmbH Item 61574 Page 5 http://www.WilTec.de...