Table of Contents
Advertisement
Trip Amplifier 2/209
Software description
4.6
Installation of the PC program
The 2/209 software will operate on any IBM compatible PC with 512 kB memory and an
MS-DOS or PC-DOS operating system Version 3.0 or higher.
For maximum user friendliness install a Mouse and an EGA or VGA monitor. However,
the program will also run without a Mouse and with a monochrome monitor. If you want
to use a Mouse, make sure the corresponding driver is loaded. It is best to incorporate
the driver in the start batch using an editor to do so (file: START.BAT).
If a WINCHESTER drive is available, a new directory should be generated. Afterwards
all the files should be copied from the floppy disk to the new directory.
Example
•
c:
•
md PC2209
•
cd PC2209
•
xcopy a:*.* /s
•
dir
Now the following files should be listed:
START
MAIN_209
COMP_209
SIMU_209
EDIT_209
SYNATAX
TXT_209G
TXT_209E
HLP_209G
HLP_209E
EDT_209G
EDT_209E
DEMO
STD
While in DOS type TYPE START.BAT to display the START file.
REM MOUSE
that
MAIN_209 %1 %2
Activate the english version by entering START /e /2. The menu will then appear on the
screen.
BAT
Start batch
EXE
Menu support
EXE
Compiler
EXE
Emulator
EXE
Editor
OPL
Syntax for the compiler
TXT
German menu
TXT
English menu
HLP
German help
HLP
English help
HLP
German help for editor functions
HLP
English help for editor functions
DIR
Subdirectory with sample programs
DIR
Subdirectory with standard programs
here you may want to add the MOUSE driver; in
case please remove the REM statement.
this program starts the menu support.
EN
37
Advertisement
Table of Contents
