Mounting And Installation; Configuration - Pepperl+Fuchs KFD2-SR3-2.2S Manual

Functional Safety KFD2-SR3-(Ex)2.2S

Mounting and Installation

4 Mounting and Installation
Installing the device
1. Observe the safety instructions in the instruction manual.
2. Observe the information in the manual.
3. Observe the requirements for the safety loop.
4. Connect the device only to devices that are suitable for this safety application.
5. Check the safety function to ensure the expected output behavior.
4.1

Configuration

Configuring the Device
The device is configured via DIP switches. The DIP switches for setting the safety
functions are on the front of the device.
1. De-energize the device before configuring the device.
2. Open the cover.
3. Configure the device for the required safety function via the DIP switches,
4. Close the cover.
5. Secure the DIP switches to prevent unintentional adjustments.
6. Connect the device again.
Note!
For more information see the corresponding datasheets.
14
see chapter 3.3.