Table of Contents
Advertisement
Trip Amplifier 2/209
Handling with a PC
6.4
Action 4 – How to edit standard programs
<F6>
1 <ENTER>
zero
full scale
display
display mode
input zero
trip point
hysteresis
display
display mode
relay action
switch at
contact
Changes become valid once you have accepted entries by pressing 0 = OK or select OK
via the <TAB> key (will be highlighted) followed by <ENTER>. Abort using <ESC>.
6.5
Action 5 – How to save and send programs
<ALT><W>
NAME.209
<ALT><S>
Call a standard program.
Select the desired program number 1 (example 1). A window will
be opened for user entries (<F1> HELP).
0
Use <TAB> key to move forward.
100
Towards entry fields.
E01
Use <SHIFT-TAB> to move backwards.
2
( ) live
Change using arrow keys.
( ) dead
Change using arrow keys.
50
1
L01
2
( ) OFF
Change using arrow keys.
( ) ON
Change using arrow keys.
( ) set
Change using arrow keys.
( ) hyst
Change using arrow keys.
( ) LOW
Change using arrow keys.
( ) HIGH
Change using arrow keys.
( ) Line - toggle using space key (X = active).
Save data on file. This is to establish a back-up copy of a
standard copy after effecting changes. The copy can later be
used to configure spares or new devices (see <ALT><S>).
However the changes cannot be displayed in the same menu
supported way as the original standard setting.
Type the desired name and press <ENTER>. If you want to
create several identical devices, repeat above action from
<ALT><W> and issue a file name per device (TAG No).
Save data in the trip amplifier. If you want to create several
identical devices, connect them to your personal computer one
by one and save data with <ALT><S>.
EN
41
Advertisement
Table of Contents
