Mounting And Installation; Configuration - Pepperl+Fuchs HiC283 Series Manual

Functional Safety HiC283*

Mounting and Installation

4 Mounting and Installation
Mounting and Installing the Device
1.
Observe the safety instructions in the instruction manual.
2.
Observe the information in the manual.
3.
Observe the requirements for the safety loop.
4.
Connect the device only to devices that are suitable for this safety application.
5.
Check the safety function to ensure the expected output behavior.
4.1

Configuration

Configuring the Device
The device is configured via DIP switches. The DIP switches for setting the safety functions
are on the side of the device.
1.
De-energize the device before configuring the device.
2.
Remove the device.
3.
Configure the device for the required safety function via the DIP switches, see chapter 3.3.
4.
Secure the DIP switches to prevent unintentional adjustments.
5.
Mount the device.
6.
Connect the device again.
Note
See corresponding datasheets for further information.
16