ProForm 1200 E User Manual page 9

,
Apply a small amount of grease to the barrel of
an M10 x 65mm Bolt Set (94).
Attach the Left Pedal Arm (14) to the bracket on
the Left Track Arm (12) with the M10 x 65mm
Bolt Set (94).
Attach the Right Pedal Arm (not shown) to
the Right Track Arm (not shown) in the same
way.
12
94
,
Identify the Left Handlebar (19), which is marked
with an "L."
Insert the Left Handlebar (19) into one of the
Handlebar Legs (17). Turn the Left Handlebar
and the Handlebar Leg so that the wide side
of the pivot tube on the Left Handlebar is
above the hexagonal holes in the Handlebar
Leg.
Attach the Left Handlebar (19) with two M8 x
38mm Button Bolts (58) and two M8 Locknuts
(72), Make sure that the Locknuts are inside
the hexagonal holes. Do not tighten the
Button Bolts yet.
Assemble the Right Handlebar (20) and the
other Handlebar Leg (17) in the same way.
Hexagonal
Holes
17