B) Choice Of Location - Sensor Espio Installation And Operation Manual

8

b) Choice of location

Sensor Espio™ must be positioned in the centre of the long side (position recommended for
rectangular swimming pools) and against a flat wall in your pool. If your pool does not correspond to
the configurations shown below, ask your retailer for advice.
Ensure that the central unit is more than one meter away from the filtration system
(return fittings, waste plug, skimmer, vacuum fittings, etc.) or waterfall or any other
!
device that may disturb the pool at this place.
Your immersion detector has been designed and configured in compliance with the NF P90-
307/A1 standard, and can be used in pools with maximum dimensions of 10 x 5 meters. Your
immersion detector must not be further than 7 meters from all possible fall locations.
!
In the case of a larger swimming pool, you must use several pool alarms, ask your retailer for
advice.
In the case of a particular shape, ask your retailer for advice.
7 meters maxi
-8-