Tools Required - Sensor Espio Installation And Operation Manual

6
- 1 Pozi screwdriver
- 1 drill with concrete bit Ø8mm
- 4 1,5-litre bottles
- 1 cutter
- 1 pen
- 1 tape measure
Your pool alarm must be installed in calm weather on a still pool.
The installation of Sensor Espio™ is done in 6 steps:
a) Inserting the batteries
b) Choice of location
c) Existing pool: set up of the attachment and temporary installation
or
c') Pool under construction: set up of the attachment and temporary installation
d) Installation tests
e) Existing pool: final attachment of Sensor Espio™
or
e') Pool under construction: final attachment of Sensor Espio™
f) Validation tests.
The pool water must be clear and clean.
!
Tools required for installation:
-6-