Replacing The Batteries - Sensor Espio Installation And Operation Manual

25

REPLACING THE BATTERIES

Sensor Espio™ gives a low-battery alert by:
•1 low pitched beep every minute,
•1 low pitched beep at each change of status (I want to have a swim, Automatic restart, Manual
restart,...).
In this case, the 4 alkaline batteries, 1,5V LR20 must be replaced with new batteries of the same type
as soon as possible.
For practical safety reasons, we advise you to replace the batteries at the start of the season.
The use-by dates are given on the alkaline batteries. Be responsible, and take the old batteries back
to your retailer instead of throwing them away.
Procedure:
Put Sensor Espio™ in off mode (see page 24).
Make absolutely sure that Sensor Espio™ is vertical when handled, with the battery
compartment down.
When you put Sensor Espio™ in off mode, ensure that pool access is secured.
DURING THIS TIME, YOUR POOL IS NOT PROTECTED. UTMOST VIGILANCE IS REQUIRED
FROM THE PARENT/RESPONSIBLE ADULT.
-25-