Sensor Espio Installation And Operation Manual page 16

15
If need be, cut the protection down to
size using a craft knife.
Regularly check the water level in your pool, especially when the weather is very hot, or rainy, or
if it has been windy for several days. The immersion level must imperatively be as recommended
!
(more or less 2 cm). If this instruction is not complied with, your fall detector will not work
properly
Sensor Espio™ exits "test mode" after 30 minutes and informs pool owner by a specific sound.
!
When the final attachment is done, you must proceed validation tests. (see page 18).
Check the immersion level.
-15-