F) Validation Tests - Sensor Espio Installation And Operation Manual

18

f) Validation tests

For these tests, your swimming pool must be still and Sensor Espio™ must be in ARMED mode (green
indicator light flashing). If such is not the case, press the grey button on your remote control.
If in spite of this, the indicator light does not switch to green, this means that the pool is not still
!
enough.
It is necessary to wait 10 minutes (even if the indicator is green) in order to allow your pool
alarm analyse its environment and stabilize itself (green indicator).
!
You will be able to carry out the tests only after this 10 minutes period.
Sensor Espio™ is monitoring.
Filtration system and robot cleaner on for
10 minutes, Sensor Espio™ is monitoring.
The siren must go off less than 12 seconds
after the fall. Stop the alarm by pressing the
grey button on your remote control.
Filtration system on for 10 minutes,
Sensor Espio™ is monitoring
Filtration system and robot cleaner on for
10 minutes from the sport furthest away
from Sensor Espio™, drop the 6 kg weight
from the top of the coping.
Wait for the automatic restart (green
indicator flashing) then repeat the tests
from different spots.
-18-