Table of Contents
Advertisement
Videojet connect 7000
This information can help with problem solving or when fine tuning the unit. For example:
–
–
–
14.1.6
Status icons
Various overlays in the video image provide important status information. The overlays provide
the following information:
The frame might show artifacts due to decoding errors.
Indicates that an alarm has occurred.
A communication error, such as a connection failure to the storage medium, a protocol
violation or a timeout, is indicated by this icon.
Indicates a gap in the recorded video.
The watermark set on the media item is valid. The color of the check mark changes according
to the video authentication method that has been selected.
Indicates that the watermark is not valid.
Indicates that a motion alarm has occurred.
Indicates that recorded video is being retrieved.
14.1.7
IP Address of Connected Devices
To the left of the status icons in the upper right corner of the window, the browser displays
the IP address of each camera connected to VIDEOJET connect 7000.
14.2
Playback
Click PLAYBACK in the application title bar to view, search or export recordings. This link is
only visible if a direct iSCSI or memory card has been configured for recording. (With VRM
recording this option is not active.)
A collapsible panel on the left of the display has four tabs:
–
–
Bosch Security Systems
if the storage activity is too high, change the recording profile,
if the CPU load is too big, change the IVA settings,
if the network load is too big, change the encoder profile to reduce bitrate.
Decoding error
Alarm flag
Communication error
Gap
Watermark valid
Watermark invalid
Motion alarm
Storage discovery
Track list
Export
Installation Manual
Operation via the browser | en
2019-08 | 1.7 | F.01U.291.524
49
Advertisement
Table of Contents
