Siemens HIPATH 8000 User Manual page 20

Getting to know your OpenStage phone
Secondary line
The secondary line on your phone is used as a primary line by another sub-
scriber in the LAN. Your primary line, which is configured on another tele-
phone in the LAN, simultaneously functions as the secondary line on that
telephone.
Phantom line
Phantom lines are not used as primary lines by any telephones in the LAN.
Phantom lines are established when the number of lines provided by a
communications system exceeds the number of available telephones.
Line utilization
•
•
The line status is indicated by the LED in addition to the display in the line
overview
LED display
LED
S
T
R
20
Private line: A line that is used by a single telephone. This line cannot
be used as a secondary line by another telephone.
Shared line: A line that is configured on multiple telephones. The line
status (if configured) is displayed in the line overview for all telephones
that share this line. If, for example, a shared line is being used by a tele-
phone, a status message indicating that this line is busy is displayed on
all other telephones.
page 28.
Explanation
Not lit: The phone is in idle mode.
Flashing:
• Incoming call on the line (
• "Hold reminder" is activated (
Flickering:
• Outgoing call on the line
• The incoming call was prioritized and selected via the "Au-
tomatic line selection for incoming calls"
Fast blinking: The line is on "Hold".
Blinking: Call forwarding is activated
Illuminated: The line is busy
page 79)
page 61)