Enhanced phone functions
Step by Step
Hold
Reconnect
60
Placing a call on hold
You can use this function to place an ongoing call on
hold, for instance, to prevent the other party overhear-
ing a conversation with a colleague in the same room.
The "Hold" function must be activated by the service
personnel.
Prerequisite: You are conducting a call.
Select and confirm the option shown in the connec-
tions's context menu.
Retrieving a held call:
Select and confirm the option shown in the connec-
tions's context menu.
Using line keys
On multi-line telephones you can use the line keys to
place ongoing calls on hold.
R
Press the corresponding line key. The line key LED
starts flickering. The call is now on hold.
Retrieving a held call:
T
Press the corresponding line key. The line key LED
lights up. The call is retrieved.
The LED display
the "Overview" tab
multi-line telephones on which this line is also
configured, that the call is on hold. These phones
can then pick up the call.
page 20 or status display on
page 28 indicates to other