Answering A Call Via The Headset; Switching To Speakerphone Mode - Siemens HIPATH 8000 User Manual

Basic phone functions
Step by Step
if nec.
n
36
• Adjust the call volume while speakerphone mode is
active.
• The ideal distance between the user and the phone
in speakerphone mode is 50 cm.

Answering a call via the headset

Prerequisite: A headset is connected.
The phone is ringing. The audio key
o
Press the key shown.
+-
Set the call volume.

Switching to speakerphone mode

Prerequisite: You are conducting a call via the handset
and the microphone and loudspeaker functions have
been activated by service personnel.
Standard mode
\
and Hold down the key and replace the handset. Then re-
lease the key and proceed with your call.
US mode
If the country setting is set to US, you do not have to
hold down the loudspeaker key when replacing the
handset to switch to speakerphone mode.
n
Press the key shown.
\
Replace the handset. Proceed with your call.
Make note of the two different processes and ac-
tivate, if necessary, your preferred setting
page 123.
o
flashes.