Table of Contents
Advertisement
Machine Control Panels
1 About this documentation
1.1 About this documentation
Overview on target groups and product phases
In the following illustration, the framed activities, product phases and target
groups refer to the present documentation.
Example: In the product phase "Mounting (assembly/installation)", the "mechan-
ic/electrician" can execute the activity "install" using this documentation.
Product
Selection
phases
Presales Aftersales
Design engineer
Programmer
Technologist
Target
Process
groups
specialist
Select
Prepare
Activities
Design
Construct
Fig. 1-1: Assigning the present documentation to the target groups, product phases and ac-
tivities of the target group
Purpose
This document instructs the technical staff of the machine manufacturer on how
to safely perform the mechanic and electric installation and on how to commis-
sion the machine control panels IndraControl VAM 15.1/VAM 21.1.
Required qualifications: Individual who is able to assess the tasks assigned and
to identify possible safety risks owing to qualification in the subject, knowledge
and experience. The individual should also be familiar with the standards and
regulations.
Scope
This operating instruction applies to all variants whose type code starts with
"VAM15.1...." or with "VAM21.1....". The type code specifications are located on
DOK-SUPPL*-VAM*15*21*1-IT02-EN-P
Mounting
Engineering
(assembly/installation)
Mechanic/
electrician
Programmer
Commissioning engineer
Unpack
Parameterize
Mount
Program
Install
Configure
Simulate
Bosch Rexroth AG
About this documentation
Commissioning
Operation
Technologist
Process specialist
Machine
operator
Maintenance
technician
Service
Optimize
Operate
Test
Maintain
Remove
faults
Create
the NC program
Decommissioning
Mechanic/
electrician
Disposal company
Dismount
Dispose
1/53
Advertisement
Table of Contents
