Technical Data; Basic Device - REXROTH IndraControl VAM 21.1 Operating Instructions Manual

Machine control panels
Table of Contents

Advertisement

Bosch Rexroth AG

Technical data

NOTICE
The ambient air must not contain acids, alkaline solutions, corrosive agents,
salts, metal vapors and other electrically conductive contaminants in high
concentrations
The ambient air must be free of dust
Housing and installation compartments must at least comply with degree of
protection IP 54 according to DIN EN 60529
NOTICE
Due to the risk of corrosion, avoid sulphurous gases (e.g. sulphur dioxide (SO
and hydrogen suphide (H
This is a product that corresponds to the limit values of the emitted
interference of class A (industrial environments), but not of class B
(residential area and small enterprises).
When using the product in residential areas or small enterprises, the
operator has to take actions to prevent radio interferences (also re-
fer to DIN EN 55022).
7 Technical data

7.1 Basic device

Degree of protection
Front foil color
Dimensions (W × H × D)
Mounting cut-out (W × H)
Weight
Front panel material
Tab. 7-1: Basic device – General technical data
8/53
Failure of the product due to contaminated air
Defective product due to gases jeopardizing
functions
S)). The product is not resistant against these gases.
2
IndraControl VAM 15.1
IP 54 (front panel)
RAL 7024 graphite gray
422 mm × 169 mm × 84.1 mm
403 +1/-0 mm × 152 +1/-0 mm
Approx. 2120 g
Anodized aluminum, completely embedded, chemical resistant polyest-
er foil
Machine Control Panels
IndraControl VAM 21.1
350 mm × 169 mm × 84.1 mm
330 +1/-0 mm × 151 +1/-0 mm
Approx. 1940 g
DOK-SUPPL*-VAM*15*21*1-IT02-EN-P
)
2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Indracontrol vam 15.1

Table of Contents