Standards; Standards Used; Ce Marking; Declaration Of Conformity - REXROTH IndraControl VAM 21.1 Operating Instructions Manual

Machine Control Panels

8 Standards

8.1 Standards used

Standard
EN 60204-1
EN 61000-6-4
EN 61000-6-2
EN 61131-2
EN 60947-5-5
EN 60529
EN 60068-2-6
EN 60068-2-27
EN 60721-3-3
EN 60721-3-2
EN 60721-3-1
DIN EN 61131-2
UL 61010
Tab. 8-1: Standards used

8.2 CE marking

8.2.1 Declaration of conformity

The electronic products described in the present operating instructions comply
with the requirements and the target of the following EU directive and with the
following harmonized European standards:
EMC directive 2004/108/EC (valid until 04/19/2016)
EMC directive 2014/30/EU (valid from 04/20/2016)
The electronic products described in the present operating instructions are in-
tended for use in industrial environments and comply with the following require-
ments:
DOK-SUPPL*-VAM*15*21*1-IT02-EN-P
Meaning
Safety of machinery - Electrical equipment of machines
Generic standards - Emission standard (industrial environments)
Generic standards – Noise immunity (industrial environments)
Requirements on the 24 V inputs and outputs
Low-voltage switchgear and control gear - Control circuit devices and
switching elements - Electrical emergency stop device with mechanical
latching function
Degrees of protection (including housings and installation compart-
ments)
Vibration test
Shock test
Classification of ambient conditions – Operation
Classification of ambient conditions – Transport
Classification of ambient conditions – Storage
Programmable logic controllers
Equipment and test requirements
Industrial Control Equipment
Bosch Rexroth AG
Standards
11/53