Planet FSD-504HP User Manual

1. Package Contents
Check the following contents of your package:
 Fast Ethernet High Power PoE Switch x 1
 User's Manual x 1
 Power Adapter x 1
 Power Cord x 1
 Rubber Feet x 4
If any of these are missing or damaged, please contact
your dealer immediately; if possible, retain the carton
including the original packing material, and use them
again to repack the product in case there is a need to
return it to us for repair.
- 1 -
2. Product Features
 RJ-45 Interface
 Five 10/100Mbps Fast Ethernet ports
 4 ports support 48V DC power to PoE Powered
Device
 Power over Ethernet
 Complies with IEEE 802.3af / at Power over
Ethernet Mid-Span PSE
 Up to 4 IEEE 802.3af / at devices powered
 Supports PoE Power up to 30 watts for each PoE
port
 60 watts PoE Budget
 Auto detects powered device (PD)
 Circuit protection prevents power interference
between ports
 Remote power feeding up to 100m
- 2 -
 Switching
 Hardware based 10/100Mbps Auto-Negotiation and
Auto MDI/MDI-X
 Flow control for Full Duplex operation and back
pressure for Half Duplex operation
 1536Bytes packet size support
 Integrates address look-up engine, supporting 1K
absolute MAC addresses
 Automatic address learning and address aging
 Hardware
 Desktop palm size
 LED indicators for PoE ready / activity and LINK /
ACT
 One DC 48V power jack
- 3 -
3. Switch Front Panel
Figure 3-1 shows the front panel of FSD-504HP.
5-Port 10/100Mbps
PoE
802.3at PoE+ Switch
LNK ACT
PWR 1 2 3 4 5
FSD-504HP
Figure 3-1: FSD-504HP Front Panel
- 4 -
4. LED Indicators
 System
LED Color Function
Light: Indicates the Switch has
PWR Green
power.
 Per 10/100Mbps Port
LED Color Function
Light: Indicates the port is
PoE Orange providing 48V DC in-line
power.
Light: Indicates the link
through that port is
successfully established
at 10/100Mbps.
LNK/ACT Green
Blink: Indicates that the Switch
is actively sending or
receiving data over that
port.
- 5 -
5. Switch Rear Panel
Figure 5-1 shows the rear panel of FSD-504HP.
48V DC
5 4 3 2 1 Uplink
Figure 5-1: FSD-504HP Rear Panel
1. The device is a power-required device,
meaning it will not work till it is powered.
If your networks should be active all the
time, please consider using UPS (Uninter-
rupted Power Supply) for your device. It
will prevent you from network data loss
Power
or network downtime.
Notice
2. In some area, installing a surge suppres-
sion device may also help to protect your
FSD-504HP from being damaged by un-
regulated surge or current to the FSD-
504HP or the power adapter.
- 6 -
6. Installing the Switch
This part describes how to install your Fast Ethernet
High Power PoE Switch and make connections to
it. Please read the following topics and follow the
procedures as presented.
This Fast Ethernet High Power PoE Switch
does not need software configuration.
Note
Desktop Installation
To install the Fast Ethernet High Power PoE Switch on
desktop, simply follow the following steps:
Step 1: Attach the rubber feet to the recessed areas
on the bottom of the Fast Ethernet High Power
PoE Switch.
Step 2: Place the Fast Ethernet High Power PoE Switch
on desktop near AC power source for its power
adapter.
Step 3: Keep enough ventilation space between the
Fast Ethernet High Power PoE Switch and the
surrounding objects.
When choosing a location, please keep in
mind the environmental restrictions dis-
cussed in Chapter 7 -- Product Specifica-
Note
tions.
- 7 -
Step 4: Connect your Fast Ethernet High Power PoE
Switch to network devices.
A. Connect one end of a standard network cable to
the 10/100Mbps RJ-45 ports on the back of the
Fast Ethernet High Power PoE Switch.
B. Connect the other end of the cable to the network
devices such as printer servers, workstations or
routers.
Step 5: Connect your Fast Ethernet High Power PoE
Switch to PoE PD devices.
A. Connect one end of a standard network cable to
port 2 to port 4 10/100Mbps RJ-45 ports on the
back of the Fast Ethernet High Power PoE Switch.
B. Connect the other end of the cable to the 802.3at
/ af powered devices.
Office Building Office Area
Speed Dome
IEEE 802.3af PoE
DC VoIP Phone
PoE
IEEE 802.3at
PoE
PoE Splitter
FSD-504HP
PoE
IEEE 802.3af
PoE
PoE IP Camera
Control Room
IEEE 802.3af PoE Extender
PoE IP Camera
Power Line (DC)
DC
100Base-TX UTP
Office Building Warehouse
100Base-TX UTP with PoE
PoE
- 8 -