Planet FSD-804P User Manual

Fast ethernet switch with 802.3af injector built-in
Hide thumbs Also See for FSD-804P:

Advertisement

Quick Links

Trademarks
Copyright  PLANET Technology Corp. 2005.
Contents subject to which revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp. All other trade-
marks belong to their respective owners.
Disclaimer
PLANET Technology does not warrant that the hardware will work properly in
all environments and applications, and makes no warranty and representa-
tion, either implied or expressed, with respect to the quality, performance,
merchantability, or fitness for a particular purpose.
PLANET has made every effort to ensure that this User's Manual is accurate;
PLANET disclaims liability for any inaccuracies or omissions that may have
occurred.
Information in this User's Manual is subject to change without notice and does
not represent a commitment on the part of PLANET. PLANET assumes no re-
sponsibility for any inaccuracies that may be contained in this User's Manual.
PLANET makes no commitment to update or keep current the information
in this User's Manual, and reserves the right to make improvements to this
User's Manual and/or to the products described in this User's Manual, at any
time without notice.
If you find information in this manual that is incorrect, misleading, or incom-
plete, we would appreciate your comments and suggestions.

FCC Warning

This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment gen-
erates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the Instruction manual, may cause harmful interfer-
ence to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be
required to correct the interference at whose own expense.

CE Mark Warning

This is a Class A product. In a domestic environment, this product may cause
radio interference, in which case the user may be required to take adequate
measures.

Advertisement

Table of Contents
loading

Summary of Contents for Planet FSD-804P

  • Page 1: Fcc Warning

    Trademarks Copyright  PLANET Technology Corp. 2005. Contents subject to which revision without prior notice. PLANET is a registered trademark of PLANET Technology Corp. All other trade- marks belong to their respective owners. Disclaimer PLANET Technology does not warrant that the hardware will work properly in...
  • Page 2 Do not dispose of WEEE as unsorted municipal waste and have to col- lect such WEEE separately. Revision PLANET Fast Ethernet Switch with 802.3af injector built-in User’s Manual FOR MODEL: FSD-804P Rev: 1.0 Part No. 2010-A31110-000...
  • Page 3: Table Of Contents

    1.1 Package Contents 1.2 How to Use This Manual 1.3 Product Features 1.4 Product Specifications Chapter 2 Installation 2.1 Product Description 2.2 Installing a FSD-804P Chapter 3 Switch Operation 3.1 Address Table 3.2 Learning 3.3 Forwarding & Filtering 3.4 Store-and-Forward 3.5 Auto-Negotiation...
  • Page 5: Chapter 1 Introduction

    1.2 How to Use This Manual This Ethernet Switch User Manual is structured as follows: Chapter 2 Installation This chapter explains the functions and how to physically install the FSD-804P. Chapter 3 Switch Operation This chapter explains the switch operation of FSD-804P.
  • Page 6 ● Automatic address learning and address aging ● Supports Auto MDI/MDI-X function ● LED indicators for easy network diagnostic ● Comply with IEEE802.3 Ethernet, IEEE802.3u Fast Ethernet, IEEE802.3x Flow Control and IEEE802.3af Power over Ethernet ● EMI standards comply with FCC, CE class B...
  • Page 7: Product Specifications

    1.4 Product Specifications Model FSD-804P Hardware Specification Network ports 8-Port RJ-45 for 10/100TX 4-Port with PoE injector function LED Display One power, 1-4 port PoE in-use, LNK/ACT, 100 5-8 port LNK/ACT, 100 PoE RJ-45 Pin polarity 4/5: Positive; 7/8: Negative Switch architecture Store and forward switch architecture.
  • Page 8: Chapter 2 Installation

    2.1 Product Description For cost saving and flexible using of PoE power provision, half of the 10/100Mbps TP ports of FSD-804P provide PoE power injector function which is able to drive 4 IEEE802.3af compliant powered devices. For SOHO or department network, the switches also provide a Simple and cost-effective, highly reliable network connection.
  • Page 9: Installing A Fsd-804P

    FSD-804P on a desktop or shelf, simply complete the following steps. 2.2.1 Desktop Installation To install a FSD-804P on a desktop or shelf, simply complete the following steps: Step1: Attach the rubber feet to the recessed areas on the bottom of the switch.
  • Page 10 The FSD-804P is able to support power to 4 IEEE802.3af compliant powered devices. When the powered device is connected to the FSD-804P by an Ethernet cable at the first 4 ports, the FSD-804P automatically detect the device and check if it is compliant with...
  • Page 11: Chapter 3 Switch Operation

    Chapter 3 SWITCH OPERATION 3.1 Address Table The Switch is implemented with an address table. This address table composed of many entries. Each entry is used to store the address information of some node in network, including MAC address, port no, etc. This in-formation comes from the learning process of Ethernet Switch.
  • Page 12: Auto-Negotiation

    3.5 Auto-Negotiation The STP ports on the Switch have built-in “Auto-negotiation”. This technology automatically sets the best possible bandwidth when a connection is established with another network device (usually at Power On or Reset). This is done by detect the modes and speeds at the second of both device is connected and capable of, both 10Base-T and 100Base-TX devices can connect with the port in either Half- or Full-Duplex mode.
  • Page 13: Chapter 4 Trouble Shooting

    Chapter 4 TROUBLE SHOOTING This chapter contains information to help you solve problems. If the Ethernet Switch is not functioning properly, make sure the Ethernet Switch was set up according to instructions in this manual. The Link LED is not lit Solution: Check the cable connection and remove duplex mode of the Ethernet Switch Performance is bad...
  • Page 14: Switch's Rj-45 Pin Assignments

    APPENDEX A Switch’s RJ-45 Pin Assignments A.1 1000Mbps, 1000Base T Contact MDI-X BI_DA+ BI_DB+ BI_DA- BI_DB- BI_DB+ BI_DA+ BI_DC+ BI_DD+ BI_DC- BI_DD- BI_DB- BI_DA- BI_DD+ BI_DC+ BI_DD- BI_DC- Implicit implementation of the crossover function within a twisted-pair cable, or at a wiring panel, while not expressly forbidden, is beyond the scope of this standard.
  • Page 15 The standard cable, RJ-45 pin assignment The standard RJ-45 receptacle/connector There are 8 wires on a standard UTP/STP cable and each wire is color-coded. The following shows the pin allocation and color of straight cable and crossover cable connection: Figure A-1: Straight-Through and Crossover Cable Please make sure your connected cables are with same pin assignment and color as above picture before deploying the cables into your network.
  • Page 18 Part NO.:2010-A31110-000...

Table of Contents