Table of Contents
Advertisement
6.
Remove the TouchPad board bracket (6).
7.
Swing the keyboard cable (1) up and back to access the TouchPad board.
8.
Remove the two silver Phillips PM2.0×2.4 broadhead screws (2) that secure the TouchPad board to
the keyboard/top cover.
9.
Remove the black Phillips PM2.0×2.4 broadhead screw (3) that secures the TouchPad board to
the keyboard/top cover.
10.
Lift the front edge of the TouchPad board (4) until it rests at an angle.
48
Chapter 6 Keyboard/base removal and replacement procedures
Advertisement
Table of Contents
