Input Power - HP Pavilion x2 12-B100 Maintenance And Service Manual

Input power

The power information in this section may be helpful if you plan to travel internationally with the slate.
The slate operates on DC power, which can be supplied by an AC or a DC power source. The AC power source
must be rated at 100–240 V, 50–60 Hz. Although the slate can be powered from a standalone DC power
source, it should be powered only with an AC adapter or a DC power source that is supplied and approved by
HP for use with this slate.
The slate can operate on DC power within the following specifications. Operating voltage and current varies
by platform. The voltage and current for your slate is located on the regulatory label.
Input power
Operatng voltage and current
NOTE: This product is designed for IT power systems in Norway with phase-to-phase voltage not exceeding
240 V rms.
58 Chapter 9 Specifications
Rating
19.5 dc @ 2.31 A – 45 W
19.5 dc @ 3.33 A – 65 W
19.5 dc @ 4.62 A – 90 W
19.5 dc @ 6.15 A – 120 W
19.5 dc @ 7.69 A – 150 W