Adjustment Of S1 & T2 Post - Panasonic AG-DVX100BP Service Manual

1-3. Adjustment of S1 and T2 Post
LISTA linearity and Envelope waveform are adjusted by S1 and T2 post.
To adjust height of S1 and T2 post, below indicated operation is required.
1. Set to VCR mode in camera recorder and open the cassette cover.
2. Insert DV tape and confirm that the camera recorder is in the loading completion condition.
3. Close the cassette cover.
4. Unscrew the screw (A) and open the cassette cover.
1-4. Connection of EVR Tools
To performing the confirmation of envelope (item "1-11. Self-REC/PLAY Envelope Confirmation"), the following tools
are required.
NAME
Measuring Board
30pin Flat Cable
EVR Connector Board
Connection Adapter
Extension Cable
DC Cable
AC Adapter
To confirm the envelope output, connect the Connection and Measuring Boards as described below.
1. Loosen the screw and remove the EVR COVER.
Part Number
VFK1308P
VFK1317
VFK1309A
VFK1763
VFK1982
VJA1128 or LSJA0310
-----
SCREW
EVR COVER
SCREW (A)
Pcs.
1
2
1 NOTE: Enable to use with VFK1309
1 60 to 30pin
1
1 For DVX100B/DVX102B/DVC180MC
1 For DVX100B/DVX102B/DVC180MC
MECH-2
Remark