White Shading Adjustment (Auto) - Panasonic AG-DVX100BP Service Manual

4-8 White shading adjustment (Auto)

1. Set the GAIN SW of Camera-Recorder to L (0dB).
2. Set the ATW to OFF.
3. Set the Iris to Auto.
4. Aim the Camera-Recorder at white paper under the Halogen lamp condition (3100K, 2000Lux).
5. Shoot the white paper so that the full screen is white.
6. Set White Balance by pressing the AWB SW and confirm that the message "AWB OK" appears on the center
of screen.
7. Set the "Marker" to ON.
8. Press the ZEBRA SW and confirm that the marker appears on the screen.
9. Adjust the Iris dial so that luminance level is 70 to 80%. (Luminance level can be confirmed by numerical value
displayed at lower left corner of screen.)
10. Double-click the adjustment item "White shading" in the main menu. The following screen will appear.
11. Click "Execute(E)" button. Automatic adjustment starts.
12. After adjustment has been completed, click "Close(C)" button to escape this menu.
ELE-17